Audio-Technica Menu

AT-LP60XHP

Fully Automatic Belt-Drive Stereo Turntable with Headphones

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Reviews
  • Q & A

  • Overview

    The AT-LP60XHP turntable and headphones combination lets you enjoy your 33-1/3 and 45 RPM records with no additional equipment required. Based on the AT-LP60X fully automatic belt-drive turntable, the AT-LP60XHP adds an integrated headphone amplifier with a 3.5 mm (1/8") headphone jack and volume control on the front panel, so all you have to do is plug in the included ATH-250AV over-ear headphones (or other headphones of your choice) and start the records spinning.

    Of course, the turntable can also be connected to your stereo, powered speakers, computer or other components and used as a standard turntable. The detachable RCA output cable (3.5 mm male to dual RCA male) and built-in switchable phono preamp allow the turntable be connected to components with and without a dedicated phono input. Like the AT-LP60X, the AT-LP60XHP features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.

    Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60XBT’s Dual Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.

    The ATH-250AV headphones are equipped with 40 mm drivers for clear mid- and low-frequency reproduction. The lightweight construction and comfortable, isolating earpads allow you to listen for as long as you like, and the 3.5 m (11.5') cable gives you plenty of flexibility.

    The turntable comes with a 45 RPM adapter and a removable hinged dust cover.
  • Features


    • Experience the high-fidelity audio of vinyl

    • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM

    • Integrated headphone amplifier with front-panel 3.5 mm (1/8") headphone jack and volume control

    • ATH-250AV over-ear headphones with 40 mm drivers, 3.5 m (11.5') cable and 3.5 mm (1/8") stereo mini-plug

    • Anti-resonance, die-cast aluminum platter

    • Redesigned tonearm base and headshell for improved tracking and reduced resonance

    • Integral Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)

    • AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain

    • Built-in switchable phono pre-amplifier for phono- or line-level output

    • Includes: ATH-250AV headphones, detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

  • Specifications


    Type Belt drive turntable, fully automatic
    Motor DC servo-controlled
    Speeds 33-1/3 RPM, 45 RPM
    Turntable Platter Aluminum
    Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
    Signal-to-Noise Ratio >50 dB (DIN-B)
    Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
    Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec
    Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
    Power Supply Requirements 120V AC, 60 Hz, 3W
    Dimensions 359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D
    Accessories Included 3.5 mm (1/8") mini-plug (male) to dual RCA (male) output cable; 45 RPM adapter; removable hinged dust cover



    Replacement Stylus: ATN3600L

    Headphones
    Type: Closed-back Dynamic
    Driver Diameter: 40 mm
    Frequency Response: 18 – 22,000 Hz
    Maximum Input Power: 500 mW
    Sensitivity: 102 dB/mW
    Impedance: 43 ohms
    Weight: 97 g (3.4 oz), without cable
    Cable: 3.5 m (11.5')
    Connector: 3.5 mm (⅛") stereo mini-plug


    Conditions
  • Reviews

  • Q & A