Audio-Technica Menu

AT-LP60BK-USB

Fully Automatic Belt-Drive Stereo Turntable (USB & Analog)


U.S. One-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Downloads
  • Reviews
  • Q & A

  • Overview

    Get your classic albums off the shelf and into your digital media player
    Now you can experience your vinyl’s high-fidelity audio directly or convert it to digital. The AT-LP60BK-USB stereo turntable comes equipped with a USB output that allows direct connection to your computer. Includes: Mac- and PC-compatible Audacity software; an integral dual-magnet Audio-Technica phono cartridge; USB cable and adapter cables. The turntable features a built-in switchable phono preamp that enables it to be connected directly to a computer, home stereo, powered speakers and other components that have no dedicated turntable input.

    Available in silver (AT-LP60-USB) and black (AT-LP60BK-USB).
  • Features

      AT-LP60-USB turntable features
    • Convert your vinyl records to digital audio files

    • Mac- and PC-compatible Audacity software digitizes your records

    • Fully automatic belt-drive turntable operation with two speeds: 33 1/3, 45 RPM

    • Anti-resonance, die-cast aluminum platter

    • Integral Dual Magnet™ phono cartridge with replaceable diamond stylus

    • Built-in switchable phono pre-amplifier with RCA output cables to connect to audio systems and powered speakers

    • Available in silver (AT-LP60-USB) and black (AT-LP60BK-USB)


      Cables
    • USB cable

    • Dual RCA (female) to 1/8” (3.5 mm) mini-plug (male) stereo adapter cable

    • Dual RCA (female) to 1/8” (3/5 mm) mini-plug (female) stereo adapter cable


    System requirements
    PC or Mac with an available USB port (USB1.1 or higher)
    CD-R or CD-RW writer for burning CDs & installation
    Includes Audacity software for PC & Mac users
    Audacity requires:
    Mac running OS X 10.1 or later or PC running Windows (98 and above)
  • Specifications


    Type Belt drive turntable, fully automatic
    Motor DC servo-controlled
    Speeds 33-1/3 RPM, 45 RPM
    Turntable Platter Aluminum
    Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
    Signal-to-Noise Ratio >50 dB (DIN-B)
    Output Level Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
    Pre-amp “LINE”: 150 mV nominal at 1 kHz, 5 cm/sec
    Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
    USB Function A/D, D/A: 16 bit 44.1 kHz or 48 kHz USB selectable
    Computer interface: USB 1.1 Compliant Windows XP, Vista or MAC OSX
    Power Supply Requirements 120V AC, 60 Hz, 3W
    Dimensions 360.0 mm (14.17") W x 97.5 mm (3.84") H x 356.0 mm (14.02") D
    Weight 3 kg (6.6 lbs.)
    Accessories Included Dual RCA (female) to 3.5 mm (1/8") mini-plug (male) stereo adapter cable; dual RCA (female) to 3.5 mm (1/8") mini-plug (female) stereo adapter cable; 45 RPM adapter; USB cable; recording software



    Replacement Stylus: ATN3600L


    Conditions
  • Downloads

    AT-LP60-USB Manual (pdf 2.29 M)
    AT-LP60-USB Literature Sheet (pdf 217.93 KB)
    AT-LP1240-USB/AT-LP240-USB/AT-LP120-USB/AT-LP60-USB Software Manual (pdf 1.05 M)
  • Reviews

    I would recommend for people not looking for a big set up

    5

    very user friendly

    Canada

    true

    Amazing quality at a reasonable price!

    5

    This turntable was purchased to replace an old analog Audio-Technica turntable. I use the USB input to digitize old vinyl LPs. It works great with Audacity (free) but there is a bit of a learning curve if you're not familiar with the program. There are other commercial programs that will work too. I'm totally satisfied with my purchase.

    SC

    true

    I love this turntable

    5

    Good product perfect gift for any friends or family that are passionate about music

    Canada

    true

    AT-LP60BK-USB Fully Automatic Belt-Drive Stereo Turntable (USB & Analog)

    5.0 3

    100.0

  • Q & A

    What is the length of the (presumably) attached set of stereo RCA cables leading directly out of the back of the turntable?

    ebinrock

    Thank you for your inquiry. The cable is 28 inches long.

    AudioSolutionsManager

    If I play a record in full manual mode on this turntable, will it automatically stop and pick up and return the tone arm at the end of one side, or just stay there until I manually pick it up? (I would need it to do the latter to play the inner groove at the end of The Beatles' Sgt. Pepper album!)

    ebinrock70

    Thank you for your inquiry. It is automatic. It will pick up at the end of the record.

    AudioSolutionsManager

    Has the USB transfer software been updated for windows 10? I know in the past it's been a issue Thanks John

    John

    Thank you for your inquiry. Yes, it may be downloaded from audacityteam.org

    AudioSolutionsManager

    I am looking to purchase this turntable. Does this record turntable require a pre amp or can it be just hooked right up to my receiver?

    John

    All Audio-Technica turntables have an internal RIAA preamp which will allow you to connect the turntable to any LINE level input such as CD, Tape, Aux, etc.

    ATUS_Specialist3

    can I connect this turntable with my Panasonic Viera TV?

    Michael

    You may connect the turntable to a LINE level input such as Aux. You may check with your TV manufacture to inquire if their product will allow for a LINE level input signal such as that from the turntable.

    ATUS_Specialist3

    Will I be able to connect this turntable to a JVC RX-401 Receiver?

    Todd

    You may connect the turntable to any LINE level input such as CD, Tape, Aux, etc. You may check with the manufacturer of your receiver to inquire if their product will allow for proper operation of a LINE level audio source. You may find additional helpful information here: http://www.youtube.com/watch?v=8Zi7d6j8aQ0

    ATUS_Specialist3

    Just set up the turntable. Attempted to turn it on and nothing happens. Does the software control any of the switches/power? I pressed the "start" button on the front of the turntable and nothing happens. I have checked the cables, power and belt per the instructions. The start/stop buttons have no resistance when pushed.

    SA

    Thank you for your inquiry. I suspect the belt is not proerly installed.The link below will take you to an instructional video that should help you install the belt on the AT-LP60 series turntable. https://www.youtube.com/watch?v=bsPx-ahh20Y

    AudioSolutionsManager

    I recently purchased and want to install the software but don't have a CD/DVD drive on my lap top. Mac OS. Is the software available as a download? Thanks

    Kevin

    Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at audio-solutions@atus.com for assistance with this.

    ATUS_Specialist3

    Purchased the AT LP60BK. Also bought a Bose 300 sound bar and would like to connect the two. The sound Bar does not have a RCA receptor. 2 Questions. How do I connect (what adaptors) to the sound bar. #2, how does the connect to a Samsung Smart TV. It wouldnt recognize the RCA inputs...although it did if we connected it to an xbox first. So what connectors should I use? Thank you.

    DARYL

    Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at audio-solutions@atus.com for assistance with this.

    ATUS_Specialist3

    What is the difference between the AT-LP60BK-USB and theAT-LP60-USB?

    Ricardo

    The only difference is the "BK" indicates the color Black.

    ATUS_Specialist3