Audio-Technica Menu

AT8471

Microphone Isolation Stand Clamp


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Reviews
  • Q & A

  • Overview

    • Provides effective reduction of stand-transmitted noise

    • Dependably maintains positioning while securely holding the microphone

    • Compatible with 5/8"-27 threaded stands


    Fits Audio-Technica Case Style(s): R1, R5, R6, R7, R8, R9, S1, S2, S3, S4, S7, S8, S9, S10, S11, S12, S13, S14, SG1, SG2, SG3, SG4, SG5
  • Reviews

  • Q & A

    Will this clamp securely hold an AE5100? Thank you.

    Tj

    Yes the AT8471 is included and to be used with the AE5100.

    Brent

    Will this work on a AT 4040 mic?

    kelvin

    Thanks for your inquiry. This mic clamp will work on the AT 4040.

    Will this clip securely hold an AE2500? thank you

    Travis

    Yes.

    ATUS_Specialist3

    Will this Stand Clamp work with the AT 4033a microphone?

    Toupe

    Thank you for your inquiry. Yes, this will work.

    AudioSolutionsManager

    will the AT8471 Microphone Isolation Stand Clamp work with the AT2020 USB Microphone?

    babymacsdada

    The AT8471 will indeed work with the AT2020USB and AT2020USB+. Thanks!

    AudioSolutionsSpec2

    Would AT40x1 pencil mics work with this mount? Would AT40x1 pencil mics work with this mount? What is the diameter of the hole? Thank you.

    SKim

    Thank you for your inquiry. This mount would probably not hold it very securely. This mount is made for a microphone that is 26 mm in diameter. The 40 series pencil mics are 21 mm.

    AudioSolutionsManager

    Is this mic mount compatible with the AT2020?

    k5bliham

    Thank you for your inquiry. It will work, but please note that the clamp will be partially on the XLR connector of the microphone cable.

    AudioSolutionsManager

    Compatible with AT3525? The shock mounts for my AT3525's no longer (and really never did) hold the microphone securely enough for my tastes. I was wondering if I could clamp the bottom portion of that microphone with the AT8471 and dump my shock mounts all together. If this won't work I'd be open to other suggestions you might have. Thanks, Greg

    gtswindle

    Thank you for your inquiry. Yes, the AT8471 will work with this mic, although it may have to be partially on the XLR connector of the microphone cable. It may also make access to the pad and low cut filters at bit challenging.

    AudioSolutionsManager

    Is this isolation stand clip compatible with the AT2020 USB microphone and the MS7701 EuroBoom Mic stand? I really need to know cause I have both the mic and the stand and need to know if I need to return the stand.

    LucasT

    Thank you for your inquiry. Although the AT8471 is not designed for use with the AT2020 USB it will work. As for working with the MS7701 EuroBoom Mic stand it should work provided this stand has the standard 5/8 27 threads. I could not find this information on any websites, but I would assume that it does.

    AudioSolutionsManager