Audio-Technica Menu

AT8418

UniMount® Microphone Instrument Mount


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Reviews
  • Q & A

  • Overview


    • Rubber-grip spring clamp holds mic securely to instrument without marring the finish

    • Flexible boom permits aiming the microphone in any direction

    • Cable strain relief reduces cable-transmitted noise and cable damage


    Fits Audio-Technica Case Style(s): M1, M8, M12, M36
  • Reviews

    Cheap Clip Breaks Often

    2

    I have used these for m Chicago tribute band for 12 years now and it seems that every year I am replacing the clip because it's cheap plastic and breaks very easily. You would think Audio Technica would come up with a metal clip that does not break, I guess that's how they make their money on replacement clip assemblies. Not recommended for durability.........

    Hamilton, NJ

    false

    AT8418 UniMount® Microphone Instrument Mount

    2.0 1

    0.0

  • Q & A

    Could one wear it on one's eyeglass frame to point towards the lips for speaking? How thick is the clip? (I have 1cm of clearance). Would the weight (how much) pull conventional (progressive) eyeglasses askew?

    Buy Curious

    One side of the clip is 1/4" (about 6mm) thick. In my opinion, it is not secure enough to use in this way. The clamp does not clamp to an object as thin as an eyeglass frame very tightly. The weight is also a bit much and does cause movement of the eyeglasses. The AT8418 Mount (less microphone) weighs 0.05 lbs (0.02 kg) .

    audio

    I have this already and the clip end broke, my question is can you just sell the clip portion or does it only come as a whole part?

    Lucas

    Thank you for your inquiry. The AT8418 only comes as a whole part you cannot buy a clip separate.

    ATUS_Specialist4

    We have these in our rental inventory and some of the windscreens have deteriorated. Do you offer replacement windscreens for this product? Thanks, Shawn On-Stage Rentals

    Shawn

    Please contact our Parts Department at (330) 686-2600 ext 5002 or at Parts@atus.com for assistance with this.

    ATUS_Specialist3

    Will it work as a replacement for my samson airline 77 clip that is broken

    jayraldss

    The AT8418 will accommodate microphones roughly 37.8 mm (1.49") long, 12.2 mm (0.48") in diameter

    ATUS_Specialist3

    Does this mount fit AT Pro 70 lav mic?

    Algy

    Thank you for your inquiry. Yes, the AT8418 UniMount will fit the PRO 70 microphone.

    ATUS_Specialist3

    Will this mount work for a DPA 4061 microphone, used on an alto sax?

    Neil

    The AT8418 can fit lavalier or instrument lavalier microphones that have a 19mm diameter (some of our microphones are specified at 18.9mm, which is acceptable). I believe the DPA4061 has a 5.4mm diameter, which means the AT8418 will likely not fit. Feel free to double-check the diameter specification for your DPA microphone. Thanks!

    ATUS_Specialist2

    Will this mount hold either a AT829cW or the AT803b element heads? I'm curious if this little goose-neck mount will hold either of my Audio Technica Lav elements I already own, the AT803b being somewhat older.

    NickVonTech

    The AT803 and AT829cW will work with the AT8418 mount. However, the AT829cW might fit a little more loosely within that mount, comparatively. Thanks!

    AudioSolutionsSpec2

    Audio Technica Unimount Microphone How long is the cable and is it XLR connector?

    lycraman

    The AT8418 is a mount, and does not have a cable or XLR connector. However, the length of this product is 14cm long. If you are looking for the length of cable for any microphone, that can be found on that microphone's product page. Thanks!

    AudioSolutionsSpec2

    Foam Windscreen Replacement Part# for AT8418 & PRO35cW What is the correct part number, and any suitable substitute part numbers, for the foam windscreen on my PRO35cW wireless mic rig which uses the AT8418 mini-goosenech instrument clip?

    Garwoodv6

    Thank you for your inquiry. This is available as a part. Please call our parts department at 330-686-2600 option 4 and they will help with this.

    AudioSolutionsManager

    What kind and size Adapter end dose it have?

    Coltontiger

    Thank you for your inquiry. This is a mount that is made for the ATM350 and the Pro35. The windscreen holds the microphone and the other end has a clip.

    AudioSolutionsManager