Audio-Technica Menu

AT2035PK

Streaming/Podcasting Pack


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Reviews
  • Q & A

  • Overview


    The AT2035PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup. The pack includes an AT2035 cardioid condenser microphone, a pair of ATH-M20x professional monitor headphones and a studio boom arm threaded with a XLR cable.

    The adjustable studio boom arm clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick. The boom is equipped with a standard 5/8"-27 thread for easy attachment of the included microphone shock mount, and the XLR cable is threaded internally for a clean appearance and unhindered operation. Offering full 360° rotation and adjustable, spring-stabilized joints, the boom arm repositions quickly for optimal mic placement.

    The rugged AT2035 side-address studio condenser microphone delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. The mic comes with an AT8458 shock mount to attenuate any noise, shock or vibration that’s transmitted through boom. Its analog XLR output connects easily to a digital converter or mixer.

    Rounding out the pack are the ATH-M20x pro headphones, part of Audio-Technica’s critically acclaimed M-Series line. With 40 mm drivers tuned for enhanced low-frequency performance and comfortable, sound-isolating earpads, the M20x headphones are perfect for long monitoring sessions.
  • Features

    AT2035 Cardioid Condenser Microphone

    • Large diaphragm for smooth, natural sound and low noise

    • High SPL handling and wide dynamic range provide unmatched versatility

    • Custom shock mount provides superior isolation

    • Switchable 80 Hz high-pass filter and 10 dB pad

    • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source


    ATH-M20x Professional Monitor Headphones

    • Advanced build quality and engineering

    • 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils

    • Tuned for enhanced low-frequency performance

    • Circumaural design contours around the ears for excellent sound isolation in loud environments

    • Convenient single-side cable exit


    Adjustable Studio Boom Arm

    • Full 360° rotation

    • Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone

    • Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick

    • Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm

    • Internal cable management for clean desk appearance

    • Standard 5/8"-27 thread for easy attachment of the included shock mount

  • Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE20-20,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY-33 dB (22.4 mV) re 1V at 1 Pa
    IMPEDANCE120 ohms
    MAXIMUM INPUT SOUND LEVEL148 dB SPL, 1 kHz at 1% T.H.D.;
    158 dB SPL, with 10 dB pad (nominal)
    NOISE12 dB SPL
    DYNAMIC RANGE (typical)136 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO82 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS11-52V DC, 3.8 mA typical
    SWITCHESFlat, roll-off;
    10 dB pad (nominal)
    WEIGHT403 g (14.2 oz)
    DIMENSIONS170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
    OUTPUT CONNECTORIntegral 3-pin XLRM-type
    ACCESSORIES FURNISHEDAT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
    AUDIO-TECHNICA CASE STYLER5



    ATH-M20x Headphones Specifications
    Type: Closed-back dynamic
    Driver Diameter: 40 mm
    Magnet: Neodymium
    Voice Coil: Copper-clad aluminum wire
    Frequency Response: 15 – 20,000 Hz
    Maximum Input Power: 700 mW at 1 kHz
    Sensitivity: 96 dB
    Impedance: 47 ohms
    Weight: 190 g (6.7 oz), without cable and connector
    Cable: 3.0 m (9.8'), straight, left-side exit
    Accessories Included: 6.3 mm (1/4") snap-on adapter


    Conditions
  • Reviews

  • Q & A