Audio-Technica Menu

PRO 47TL

ProPoint® Cardioid Condenser Thread-mount Gooseneck Microphone


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Downloads
  • Reviews
  • Q & A

  • Overview


    This double-gooseneck cardioid condenser microphone with integral power module and 5/8"-27 adapter-mount is ideal for boardroom, school, government, house of worship and other installed applications. Featuring a wide-range condenser element with low-mass diaphragm for superior performance, the microphone’s self-contained electronics eliminate need for external power modules. Available in two lengths: 15.79" (PRO 47TL) and 12.40" (PRO 47T).
  • Features

    • Wide-range condenser element with low-mass diaphragm for superior performance

    • Self-contained electronics eliminate need for external power modules

    • Flat, smooth frequency response

    • Quiet, fixed-placement, long-life gooseneck

    • Direct mounts to any 5/8"-27 stand, or to included threaded mounting stud

    • 9.8' (3.0 m) cable permanently attached between microphone and XLRM-type connector

    • Overall length of 15.79" (401.0 mm)

    • Also available in a 12.40" (315.0 mm)-long version as PRO 47T

  • Specifications

    ELEMENTFixed-charge back plate, permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE70-16,000 Hz
    OPEN CIRCUIT SENSITIVITY-37 dB (14.1 mV) re 1V at 1 Pa
    IMPEDANCE100 ohms
    MAXIMUM INPUT SOUND LEVEL134 dB SPL, 1 kHz at 1% T.H.D.
    DYNAMIC RANGE (typical)106 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO66 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS9-52V DC, 2 mA typical
    WEIGHT2.4 oz (67 g)
    DIMENSIONS15.79" (401.0 mm) long,
    0.47" (12.0 mm) head diameter
    OUTPUT CONNECTOR3-pin XLRM-type on cable
    CABLE9.8' (3.0 m) long, permanently attached
    ACCESSORIES FURNISHEDAT8146 windscreen; AT8425 5/8"-27 threaded mounting stud
    AUDIO-TECHNICA CASE STYLEM22
    Click on the chart to view the larger image
    POLAR PATTERN
    POLAR PATTERN
    FREQUENCY RESPONSE
    FREQUENCY RESPONSE



    Conditions
  • Downloads

    PRO 47T, PRO 47TL Specification Sheet (pdf 87.38 KB)
    PRO 47T & PRO 47TL Submittal Sheet (pdf 373.79 KB)
    Optional Windscreens / Mounts
  • Reviews

  • Q & A

    The cord is breaking up right at the base of the tube, after 8 years of usage. Can I disassemble it and replace the cord?

    GG in Ca

    Please contact our Service Department at (330) 686-2600 ext 5002 or at Services@atus.com for assistance with this.

    ATUS_Specialist3

    Does this mic have a max length the wire can be from the Mixer? I have plugged this microphone in to our stage (approx 100 ft wire) and cannot get it to work. However, it does work when plugged directly in to the mixer.

    Paulzynichols

    Thank you for your inquiry. This sounds like your cable is not passing phantom power. Make sure your cable has all three wires, that you are using an XLR to XLR cable, the gorund is not lifted and that phantom power is engaged.

    AudioSolutionsManager