Audio-Technica Menu

ATM350 (DISCONTINUED)

Cardioid Condenser Clip-On Microphone


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Downloads
  • Reviews
  • Q & A

  • Overview


    Please see the updated ATM350a Instrument Microphone Systems.

    Supplied with Audio-Technica’s versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, upright bass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter on the in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.
  • Features


    • Low-profile design for minimum visibility

    • UniMount® clip permits accurate positioning, provides shock resistance and protects element

    • Unique violin mount permits unobtrusive placement of microphone between the instrument’s bridge and tailpiece

    • Crisp, clear, well-balanced response, even at high SPLs

    • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

    • Interchangeable elements available for hypercardioid and omnidirectional polar patterns

    • Corrosion-resistant contacts from gold-plated XLRM-type connector

    • Rugged, all-metal design and construction for years of trouble-free use

  • Specifications

    ELEMENTFixed-charge back plate permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE40-20,000 Hz
    LOW FREQUENCY ROLL-OFF80 Hz, 12 dB/octave
    OPEN CIRCUIT SENSITIVITY–49 dB (3.5 mV) re 1V at 1 Pa
    IMPEDANCE50 ohms
    MAXIMUM INPUT SOUND LEVEL149 dB SPL, 1 kHz at 1% T.H.D.
    DYNAMIC RANGE (typical)122 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO67 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS11-52V DC, 3.5 mA typical
    SWITCHFlat, roll-off
    WEIGHT (MICROPHONE)14.5 g (0.5 oz)
    WEIGHT (POWER MODULE)81.2 g (2.9 oz)
    DIMENSIONS (MICROPHONE)37.8 mm (1.49") long,
    12.2 mm (0.48") diameter
    DIMENSIONS (POWER MODULE)92.9 mm (3.66") long,
    18.9 mm (0.74") diameter
    OUTPUT CONNECTOR (POWER MODULE)Integral 3-pin XLRM-type
    CABLE4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector
    ACCESSORIES FURNISHEDAT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch
    AUDIO-TECHNICA CASE STYLEM36
    Click on the chart to view the larger image
    POLAR PATTERN
    POLAR PATTERN
    FREQUENCY RESPONSE
    FREQUENCY RESPONSE



    Conditions
  • Downloads

    ATM350 Specification Sheet (pdf 321.00 KB)
    ATM350 Submittal Sheet (pdf 372.91 KB)
    Optional Windscreens / Mounts
  • Reviews

  • Q & A