Audio-Technica Menu

AT2010

Cardioid Condenser Handheld Microphone


U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.



  • Overview
  • Features
  • Specifications
  • Downloads
  • Reviews
  • Q & A

  • Overview


    The AT2010 is designed to bring the studio-quality articulation and intelligibility of Audio-Technica’s renowned 20 Series to the stage, for crystal-clear vocal performances. Featuring the same 16 mm low-mass diaphragm found in the critically acclaimed AT2020 side-address studio condenser, the AT2010 excels wherever articulate vocals are needed: in houses of worship, for solo performances, jazz vocalists, singer/songwriters, and more.
  • Features

    • Extended frequency response and superior transient response for smooth, natural sonic characteristics
    • High SPL-handling and wide dynamic range provide unmatched versatility
    • Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
    • Multi-stage grille design offers excellent protection against plosives and sibilance without compromising high-frequency clarity
    • Corrosion-resistant contacts from gold-plated XLRM-type connector
    • Rugged, all-metal and construction for years of trouble-free service
    • Quiet-Flex™ stand clamp provides silent, flexible microphone positioning
  • Specifications

    ELEMENTFixed-charge back plate permanently polarized condenser
    POLAR PATTERNCardioid
    FREQUENCY RESPONSE40-20,000 Hz
    OPEN CIRCUIT SENSITIVITY–48 dB (3.9 mV) re 1V at 1 Pa
    IMPEDANCE100 ohms
    MAXIMUM INPUT SOUND LEVEL136 dB SPL, 1 kHz at 1% T.H.D.
    DYNAMIC RANGE (typical)113 dB, 1 kHz at Max SPL
    SIGNAL-TO-NOISE RATIO71 dB, 1 kHz at 1 Pa
    PHANTOM POWER REQUIREMENTS48V DC, 2 mA typical
    WEIGHT233 g (8.2 oz)
    DIMENSIONS179.1 mm (7.05") long,
    50.8 mm (2.00") maximum body diameter
    OUTPUT CONNECTORIntegral 3-pin XLRM-type
    ACCESSORIES FURNISHEDAT8470 Quiet-Flex stand clamp for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
    AUDIO-TECHNICA CASE STYLET7
    Click on the chart to view the larger image
    AT2010
    POLAR PATTERN
    AT2010
    AT2010
    FREQUENCY RESPONSE
    AT2010



    Conditions
  • Downloads

    AT2010 Specification Sheet (pdf 319.83 KB)
    AT2010 Submittal Sheet (pdf 369.57 KB)
    Optional Windscreens / Mounts
  • Reviews

    Good Quality Mic

    5

    Own to of these for front vocal - very comparable, if not clearer sound to similar priced mics

    Roseville, MN

    true

    Great guitar or piano vocal microphone

    5

    Bought one for guitar vocal who doesn't eat the mic. Works great - up close as well. Just set your gain for the distance you need. No feedback issues for me. Bought 2 more and all work great.

    Central Florida

    true

    Great condenser microphone

    5

    I was very surprised at the sound and clarity for the price. It compares with a lot of high end mics without the high cost..

    Undisclosed

    Very Good voice Mic lots of range

    5

    This mic has served us well as a general purpose wired mic for voice and guitar. it has a very large range for gain compared to some other Mics I've used and it sounds great !

    Oxford, PA 19363, USA

    AT2010 Cardioid Condenser Handheld Microphone

    5.0 4

    100.0

  • Q & A

    Does this mic have gain control? Also what wire does it come with... USB, Headphone Jack, or is it wireless?

    Meagan

    Thank you for your inquiry. This a a wired microphone. You need to provide an XLR cable to connect to your PA system.

    Rick

    will this item work with 36V power

    ed

    Unfortunately, the AT2010 requires a full 48V Phantom Power.

    ATUS_Specialist4

    Hello, I have come across some AT mics stated to be AT2010 however the marking on the mic is PG48. They are marked Audio-Technica not that 'other' brand. What are these please? Thanks.

    Dennis

    Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at audio-solutions@atus.com for assistance with this.

    ATUS_Specialist3