Audio-Technica Menu

System 10 PRO

Rack-Mount Digital Wireless Systems

|  U.S. Two-Year Limited End-User Warranty

*Manufacturer's Suggested Retail Price. Actual selling price may vary; please check with an authorized Audio-Technica dealer.

  • Rack-Mount Digital Wireless System, digital wireless system
  • Digital Wireless System, System 10 Wireless
  • Digital Wireless System, Wireless Receiver, Professional Wireless System


  • Overview
  • Features
  • Configurations
  • Specifications
  • Downloads
  • Reviews
  • Q & A

  • Overview


    Audio-Technica’s System 10 PRO Rack-Mount digital wireless system provides the same interference-free operation in the 2.4 GHz range (outside TV bands) as the original System 10 wireless system but with expanded features and versatility. The durable half-rack chassis is equipped to house two receiver units that can be operated locally or released from the chassis and mounted remotely (up to 328 feet away) via Ethernet cable. Up to five chassis (10 receiver units) can be linked using the RJ12 cable included with each system, creating a stable, multichannel system with the simultaneous use of up to 10 channels.

    Like all the products in the System 10 wireless family, the PRO Rack-Mount features 24-bit operation, easy setup, clear, natural sound quality, and three levels of diversity assurance: frequency, time, and space. Frequency Diversity sends the signal on two dynamically allocated frequencies for interference-free communication. Time Diversity sends the signal in multiple time slots to maximize immunity to multipath interference. Space Diversity uses two antennas on each transmitter and receiver unit to maximize signal integrity.

    Each System 10 PRO Rack-Mount system includes an ATW-RC13 receiver chassis with rack-mount adapters, one or two ATW-RU13 receiver units with corresponding AT8690 receiver unit mounting brackets, a joining plate (for dual-channel systems only), one RJ12 cable, one AC adapter, and one or two transmitters. Transmitter options include the ATW-T1001 cW-style body-pack transmitter, ATW-T1002 handheld transmitter, ATW-T1006 boundary microphone/transmitter and the ATW-T1007 microphone desk stand transmitter. Both the receiver chassis and transmitters feature easy-to-read displays.
  • Features


    • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance

    • Operates in the 2.4 GHz range – completely free from TV interference

    • Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility

    • Up to five chassis (ten receiver units) can be linked and used simultaneously

    • Each receiver unit can be paired with up to 10 transmitters, allowing users to instantly switch between different transmitter configurations

    • Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status

    • Automatic frequency selection for seamless, interference-free operation

    • Extremely easy operation with instantaneous channel selection, sync, and setup

    • Three levels of diversity assurance: frequency, time & space

    • Ground-lift switch helps eliminate audible hum caused by ground loops

  • Configurations

    Body-pack Transmitter System
    ATW-1301
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13 receiver unit and ATW-T1001 body-pack transmitter.

    Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.
    Lavalier Microphone System
    ATW-1301/L
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13 receiver unit and ATW-T1001 body-pack transmitter with MT830cW lavalier microphone.
    Dynamic Handheld Microphone System
    ATW-1302
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13 receiver unit and ATW-T1002 handheld dynamic unidirectional microphone/transmitter.
    Body-pack Transmitters System
    ATW-1311
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit and ATW-T1001 body-pack transmitter x2.

    Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.
    Lavalier Microphone System
    ATW-1311/L
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit and ATW-T1001 x2 body-pack transmitter with MT830cW x2 lavalier microphone.
    UniPak® Body-pack and Dynamic Handheld Microphone System
    ATW-1312
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit, ATW-T1002 handheld dynamic unidirectional microphone/transmitter and ATW-T1001 body-pack transmitter.

    Select a microphone or cable with a cW-style locking 4-pin connector to complete the system.
    Dynamic Handheld and Lavalier Microphone System
    ATW-1312/L
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13x2 receiver unit, ATW-T1002 handheld dynamic unidirectional microphone/transmitter and ATW-T1001 body-pack transmitter with MT830cW lavalier microphone.
    Dynamic Handheld Microphone System
    ATW-1322
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13 x2 receiver unit and ATW-T1002 x2 handheld dynamic unidirectional microphone/transmitter.
    Boundary Microphone System
    ATW-1366
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13 x2 receiver unit and ATW-T1006 x2 boundary microphone/transmitter.
    Microphone Desk Stand System
    ATW-1377
    ATW-RC13 Rack-mount receiver chassis, ATW-RU13 x2 receiver unit and ATW-T1007 x2 microphone desk stand transmitter.
    ATW-RC13
    Rack-mount receiver chassis for System 10 PRO systems.
    ATW-RU13
    Receiver unit for System 10 PRO systems.
    ATW-T1001
    Body-pack transmitter with cW-style locking 4-pin connector.
    ATW-T1002
    Handheld microphone/transmitter with unidirectional dynamic element.
    Includes AT8456a Quiet-Flex™ stand clamp.
    ATW-T1006 Boundary Microphone/Transmitter
    ATW-T1006
    The ATW-T1006 Cardioid Condenser Boundary Microphone/Transmitter can pair with any System 10 or System 10 PRO digital wireless receiver and is available separately.
    Microphone Desk Stand Transmitter
    ATW-T1007
    Designed to work with phantom-powered, condenser gooseneck microphones with a 3-pin XLRM-type output, the ATW-T1007 Microphone Desk Stand Transmitter can pair with any System 10 or System 10 PRO digital wireless receiver and is available separately.
  • Specifications

    OVERALL SYSTEM SPECIFICATIONS
    Operating Frequencies 2.4 GHz ISM band (2400 to 2483.5 MHz)
    Dynamic Range >109 dB (A-weighted), typical
    Total Harmonic Distortion <0.05% typical
    Operating Range 60 m (200') Open range env. with no interfering signals
    Operating Temperature Range 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures
    Frequency Response 20 Hz to 20 kHz
    Depending on microphone type
    Maximum Simultaneous Use (Recommended) 200' minimum
    RECEIVER SPECIFICATIONS
    Receiving System Diversity (frequency/time/space)
    Output Connectors Remote Receiver Connector: RJ45
    Link Connector: RJ12
    Maximum Output Level XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV
    Power Supply 100-240V AC (50/60 Hz) to 12V DC 0.5A power supply switched mode external
    Operating Temperature Range 40° F (4° C) to 110° F (43° C)
    Dimensions 209.8 mm (8.26") W x 44 mm (1.73") H x 169.3 mm (6.67") D
    Net Weight 940 grams (33.2 oz)
    Accessory Included Power supply
    Accessories Included AC adapter, Link cable, Rack-mount adapters, Joining plate, Rubber feet
    BODY-PACK TRANSMITTER SPECIFICATIONS
    RF Power Output10 mW
    Spurious EmissionsFollowing federal and national regulations
    Input ConnectionsFour-pin Locking Connector
    Pin 1: GND, Pin 2: INST INPUT,
    Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
    BatteriesTwo 1.5V AA
    not included
    Battery Life>7 hours (alkaline)
    Depending on battery type and use pattern
    Dimensions70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
    Net Weight100 grams (3.5 oz)
    without batteries
    HANDHELD TRANSMITTER SPECIFICATIONS
    RF Power Output 10 mW
    Spurious Emissions Following federal and national regulations
    Batteries Two 1.5V AA
    not included
    Battery Life >7 hours (alkaline)
    Depending on battery type and use pattern
    Dimensions 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
    Net Weight 280 grams (9.9 oz)
    without batteries
    Accessory Included AT8456a Quiet-Flex™ stand clamp



    Conditions
  • Downloads

    System 10 PRO Digital Wireless Systems Brochure (pdf 2.52 M)
    System 10 PRO Manual (pdf 804.91 KB)
    System 10 PRO Quick Start Guide (ATW-T1006 and ATW-T1007) (pdf 151.09 KB)
    System 10 PRO Submittal Sheet (pdf 199.03 KB)
    System 10 PRO Review by Lighting & Sound America
    System 10 PRO Transmitters Literature Sheet: ATW-T1006 & ATW-T1007 (pdf 260.46 KB)
    Wireless Mics & Cables
    Wireless System Accessories
    Using Wireless
  • Reviews

    An Good Alternative to the TV Bands!

    5

    Full Disclosure - I was given this product for testing and review. First of all, I'm a AV systems designer, installer and company owner. I saw the new system two years ago at Denver AVX and expressed my doubts about it's capabilities to the company rep. Turns out he was the VP of Engineering for AT! He sent me a test unit and I sent him back some real world test data. First of all, I was sure that this would have problems and so I set it up to fail. For my first test, I did not remotely mount the RX units. Also I parked it in a sound booth with an active consumer grade WiFi router/access point. I ran two channels for the entire service multiple times, at a range of 60-80 ft. with a clear line of sight and the RF was rock solid. No dropouts, no problems. I was, quite frankly, amazed. I've lived with this unit now for two years, used it for outdoor events, vacation Bible school at my church, two Christmas productions for drama and backup mics and it has never had an issue. I only have a couple minor complaints. The handheld mic does have some handling noise, so that could be improved and once when I blew a circuit breaker at an outdoor event (hey, it happens) I had to re-sync the handheld to the transmitter before the system would work again. I definitely recommend using rechargeable AA's since they use batteries faster than analog systems. However, this is to be expected considering the amount of active RF management built into these units and the fact that they are constantly encoding and sending dual streams of digital audio. In my book, this system is an excellent alternative for the TV bands! Recommended.

    Cheyenne, WY

    true

    GREAT Products to rely on!

    5

    After spend sometime study on this AT series, I met great manufacture representatives at 2016 AES in LA ... they are PRO!; I got all informations from techinical, installation till functionality for different variety capsules this system can run with. I finally pick up from MuzeekWorld and installed 10 units on 2 HH, 2 Bounderies, 3 Choir, 3 shoot gun. During the installation Tech support been contacted twice > fast and prompt response, they show their eagerness to help!! thanks team. Now after about 8 months they are on duty daily at a medium size Catholic church in San Francisco

    San Francisco, CA

    true

    have not used this yet, no microphone for bodypack

    3

    What type microphone connector on the pro bodypack transmitter (TA type??)

    Leesburg, Fla

    Yes , we are your poster children

    5

    just got a 1322 system 10 pro just in time for last Fridays gig , setup is super easy and works just like the system 10 stomp boxes my band uses for guitar bass mandolin and banjo and does not bother the older Freeway system we already have . (ya we are your poster children) opened the box when I got to the venue and plugged everything in , put batteries in the in the mic's selected two unused system id numbers and we were ready for sound check . we did wind up backing off the gain inside the mic's because they were a little hot to begin with and we couldn't get any head room on the board . so during our first set break we opened up the mic's and turned them down with the provided plastic screwdriver (A. T. thought of everything) and proceeded to have a flawless weekend . I highly recommend the system 10 pro 1322 and will soon be upgrading the two freeway mic's (4 years old , nearly 200 dates and still working great) to another one of these .

    Eaton county , Michigan

    true

    Better range than camera mount portable unit

    5

    The factory description does a good job of explaining the product, so I will not repeat the basics. The main advantage of the rack system is that the receiver electronics are better, so that overall operating range is nearly double that of the camera mount units. The ability to remote the receiver/antenna modules via a CAT 6 Ethernet cable is very useful. Personally, I mount the receiver modules onto a non-metallic (painters) pole 15 feet above my soundcart so that they have better line of sight. I like having XLR outputs and the professionalism of the rack unit.

    Los Angeles, CA, USA

    This is the product I've been waiting for.

    5

    Great rack mount feature allows me to have 6 at the ready. (A.T. Says I'm good for up to 10.) great sound quality. One drawback is that I wish I could swap the capsules to benefit from the frequency response of other A.T. Microphone designs. Stil, this gets it done quite handily. Thanks guys!

    Portland, OR, USA

    System 10 PRO Rack-Mount Digital Wireless System

    4.7 6

    100.0

  • Q & A

    Will the system 10 pro and the regular system 10 work together? Is there a difference between transmitters for the teo

    Bk

    Yes you may use PRO and "non PRO" systems together but you will be limited in your max channel count to "your weakest link" which is (8) channels. The transmitters are the same between all the System 10 family but the receivers are different.

    Brent

    I see that the System 10 Pro allows the receiver to be placed remotely and connected via Ethernet cable. Does this mean it can be plugged into an existing Ethernet network being used by other computers? Or does the Ethernet line have to be dedicated only to the receiver?

    Steve

    No, the signal is not ether and must be connected directly from the ATW-RC13 to the ATW-RU13. The CAT5 or better cable is used as it is readily available and low cost. Please contact our Audio Solutions Department at (330) 686-2600 ext 5000 or at audio-solutions@atus.com for additional assistance with this.

    Brent

    With 10 transmitters per receiver, and up to 10 receivers, does that mean I could have up to 100 transmitters in one system?

    Ted

    Thank you for your inquiry. Only one receiver can work with a single receiver at a time. Ten is the max.

    Rick

    I am really pleased with the system 10 pro hand held units. I would like to have matching wired mics. Which wired model would match the characteristics of of the wireless version?

    Gary

    Thank you for your inquiry. This microphone is of its own design. If I had to compare to a similar wired mic I would look at the ATM510.

    Rick

    I want to use the System 10 Pro for a video conferencing application. I would like to have 4 boundary mics and two handheld mics (3 linked units) feed into a PC for the video conferencing application. When linked with the RJ11 cables, can I connect a single 1/4 to 1/8 cable and have the signal from all six mics go into the PC? If yes, which unit is the cable plugged into and what cable do you recommend?

    Boyd

    Thank you for your inquiry. No, the audio outputs are not linked. The link cables allow the frequencies to be coordinated as a group. You will need a mixer or USB audio interface to link them together.

    Rick

    Are the antennas "weatherproof" or "weather resistant"? We plan on locating the antennas outdoors.

    Cory

    The antenna are not weather proof and you may use a weather resistant box designed to pass 2.4GHz frequencies such as the one listed below. https://oberoninc.com/product-series/indoor-outdoor-nema/1026-series

    Brent

    We are wanting to mount the receivers about 180 feet from the chassis. The cables will be ran through drywall and drop ceilings to get to our stage from our sound booth. Would you recommend the use of Cat5e or Cat6 for the run?

    Tim

    Either will work for you.

    Brent

    In the 1322 with dual mics , is there dual outputs to connect to separate channels on the soundboard I use, I understand that both mics can be used at the same time. I couldn't tell from the photos of the unit

    Denny

    Yes, each channel in the chassis has its own independent output connection and volume attenuator.

    Brent

    I need to replace 2 antennas on my system 10 pro . Can you assist me in the purchase for the replacement please. Thanks in advance

    Nick

    Thank you for your inquiry. Please contact our Parts Department at 330-686-2600 ext. 5002. They would be happy to help you.

    Rick

    I have a 2 channel system 10. Looking to purchase a system 10 pro. Are the mics interchangeable. Thx.

    The red dawn

    Yes, the System 10 family utilizes the same transmitters and microphones which will work with any of the receivers in the series.

    ATUS_Specialist3

    Yes, the System 10 family utilizes the same transmitters and microphones which will work with any of the receivers in the series.

    ATUS_Specialist3