ES947

The new Engineered Sound. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI. This low-profile cardioid condenser boundary microphone is recommended for unobtrusive table-, ceiling-, or panel-mount applications in high-quality sound reinforcement, professional recording and teleconferencing. Designed for permanent installation, the microphone is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module. Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone has a cardioid pattern for enhanced gain before feedback and improved signal-to-noise ratio. It is available in two colors: black (ES947) and white (ES947W).

Microphones
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Half-cardioid (Cardioid in hemisphere above mounting surface)
Frequency Response	40 - 12,000 Hz
Open Circuit Sensitivity	-42 dB (7.9 mV) re 1V at 1 Pa
Maximum Input Sound Level	142 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	113 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	65 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 2 mA typical
Weight	64 g (2.3 oz)
Dimensions	69.0 mm (2.72") long, 30.0 mm (1.18") diameter
Output Connector	Integral 3-pin XLRM-type
Accessories Included	One pair isolators