Wireless Over-Ear Headphones
ATH-M20xBT
From
$169.00
From
ATH-M20xBT
Features
- Wireless, on-the-go design delivers the same sonic signature as the wired ATH-M20x professional studio headphones
- 40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils are tuned for enhanced low-frequency performance
- Low latency mode improves synchronicity between audio and video for smooth streaming and gaming
- Multipoint pairing function allows you to stay connected to two Bluetooth devices at once
- Up to 60 hours of continuous use on a full charge and up to 3 hours of use on a 10-minute rapid charge (via USB-C connection)
- Microphone and buttons built into the left earcup let you easily control calls, music playback, and volume
- Over-ear design for excellent sound isolation in loud environments
- Professional-grade earpad and headband material for long-lasting durability and comfort
- Includes 1.2 m (3.9') cable for optional wired connection
Specifications
Headphones | |
---|---|
Type | Closed-back dynamic |
Driver Diameter | 40 mm |
Frequency Response | 5 to 32,000 Hz |
Sensitivity | 100 dB/mW |
Impedance | 36 ohms |
Weight | Approx. 216 g (7.6 oz) |
Charging Time | Approx. 4 hours The above figures depend on operating conditions. |
Operating Temperature | 5 °C to 40 °C (41 °F to 104 °F) |
Operating Time | Continuous transmission time (music playback): Max. approx. 60 hours* The above figures depend on operating conditions. |
Microphone Sensitivity | -42 dB (1 V/Pa, at 1 kHz) |
Microphone Frequency Response | 50 to 20,000 Hz |
Microphone Polar Pattern | Omnidirectional |
Power Supply | DC 3.7 V lithium polymer battery |
Accessories Included | USB charging cable (30 cm (12”), USB Type-A / USB Type-C). Audio cable (1.2 m (3.9’) /3.5 mm (1/8”) gold-plated stereo mini-plug (3 pole/L-shaped)) |
Notes | For product improvement, the product is subject to modification without notice. |
Bluetooth® | |
---|---|
Bluetooth® Version | Bluetooth version 5.0 |
Operating Range | Line of sight - approx. 10 m (33') |
Maximum RF Output | 10 mW EIRP |
Frequency Band | 2.402 GHz to 2.480 GHz |
Modulation Method | GFSK, Pi/4DQPSK, 8DPSK |
Spread Spectrum Method | FHSS |
Compatible Bluetooth Profiles | A2DP, AVRCP, HFP, HSP |
Support Codec | AAC, SBC |
Supported Content Protection Method | SCMS-T |
Transmission Band | 20 to 20,000 Hz |
Downloads
ATH-M20xBT Quick Start Guide
ATH-M20xBT User Manual
ATH-M20xBT Caution Guide