Sistema inalámbrico de alta densidad
6000 Series
6000 Series
Features
- Advanced IMD suppression enables the use of 31 simultaneous channels within a 4 MHz tuning bandwidth
- High-performance filtering removes external noise from outside the operating range
- Clear, easy-to-read displays on receiver and transmitter
- Easy transmitter setup via IR sync
- Headphone output jack for monitoring receiver output
- Ethernet connection allows monitoring and configuration via PC
- Both transmitters feature rugged, ergonomic metal bodies, highly visible OLED screens, programmable features, soft-touch controls, and switchable 2/10/50 mW RF power
- The rugged cH-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cH-style screw-down 4-pin connector
- Handheld transmitter features high-pass filter and accepts six interchangeable microphone capsules (based on best-selling Audio-Technica models) that use industry-standard thread mount and provide low handling noise
- Battery fuel gauge is selectable for alkaline or nickel-metal hydride batteries
- Full-rack metal receiver chassis includes reinforced mounting ears and rear rack mount capability
Specifications
Overall System | |
---|---|
Operating Frequencies | 946.125 MHz to 949.875 MHz |
Modulation Mode | FM |
Normal Deviation | ±5 kHz |
Maximum Deviation | ±16.25 kHz |
Frequency Response | 70 to 15,000 Hz |
Operating Range | 100 m, typical (RF power output 10 mW) |
Dynamic Range | 1/4" (6.3 mm) TS unbalanced phone jack, each channel |
Total Harmonic Distortion | <1% (63 dBuV input, ±10 kHz deviation at 1 kHz) |
Operating Temperature Range | 5° C to 45° C (41° F to 113° F) |
Number Of Channels | Total of 31 simultaneous channels (125 kHz intervals) |
Handheld Transmitter | |
---|---|
RF Power Output | 50 mW/10 mW/2 mW |
Spurious Emissions | Following federal and national regulations |
Microphone Element | Interchangeable, not included |
Battery Type | Two 1.5V AA (not included) |
Battery Life | Approximately 6 hours (alkaline), depending on battery type and use pattern |
Dimensions | 193.0 mm (7.60") long, 37.0 mm (1.46") diameter |
Net Weight | 200 grams (7.1 oz) (without batteries) |
Accessories Included | AT8456a Quiet-Flexâ„¢ stand clamp |
Body Pack | |
---|---|
RF Power Output | 50 mW/10 mW/2 mW |
Battery Life | Approximately 6 hours (alkaline), depending on battery type and use pattern |
Battery Type | Two 1.5V AA alkaline, (not included) |
Current Consumption | 230 mA or less (at DC 3 V) |
Dimensions | 62.0 mm (2.44") W x 70.0 mm (2.76") H x 17.0 mm (0.67") D, excluding protrusions |
Input Connections | Four-pin Locking Connector Pin 1: GND Pin 2: INST Pin 3: MIC Pin 4: DC BIAS +10V |
Net Weight | 90 g (3.2 oz) (without batteries) |
Spurious Emissions | Following federal and national regulations |
Receiver | |
---|---|
Receiving System | True Diversity |
Sensitivity | 20 dBuV (at 60 dB S/N ratio) |
Antenna Input | BNC-type, 50 ohms |
Antenna Power | Bias voltage 12V DC, 60 mA, each |
Power Supply | 120 V AC 60 Hz, 25 W |
Operating Temperature Range | 41° F (5° C) to 113° F (45° C) |
Dimensions | 482.0 mm (18.97") W x 43.0 mm (1.69") H x 361.0 mm (14.21") D |
Weight | 4.7 kg (10.4 lbs) |
Accessories Included | 1/2 whip antenna x2; Power cable; Legs x4 (4 mounting screws); Front-mount antenna cables and connectors |
Audio Output | XLR, balanced: >=+18 dBV (LINE), >=+4 dBV (MIC) (frequency deviation ±5 kHz) 6.3 mm (1/4") balanced: >=+18 dBV (LINE), >=+4 dBV (MIC) (frequency deviation ±15 kHz) |
Downloads
ATW-F948 Antenna Filters Manual
ATW-R6200S Receiver Manual (6000 Series Wireles)
ATW-T6001S Transmitter Manual (6000 Series Wireles)
6000 Series Software v1.2.0.10