Fully Automatic Belt-Drive Turntable with Headphones

AT-LP60XHP

Out of Stock

AT-LP60XHP

Overview

AT-LP60XHP

The AT-LP60XHP turntable and headphones combination lets you enjoy your 33-1/3 and 45 RPM records with no additional equipment required. Based on the AT-LP60X fully automatic belt-drive turntable, the AT-LP60XHP adds an integrated headphone amplifier with a 3.5 mm (1/8") headphone jack and volume control on the front panel, so all you have to do is plug in the included ATH-250AV over-ear headphones (or other headphones of your choice) and start the records spinning.

Your Entry Into the World of Vinyl

Venture into Vinyl

Discover (or rediscover) the wonder of vinyl records. This affordable, easy-to-use turntable is the perfect entry into the world of analog audio.

Plays 33-1/3 and 45 RPM Records

Built-in Switchable Phono Pre-amplifier

Fully Automatic Operation

Replaceable Stylus

Simple from the Start

Easy Operation

The included high-fidelity headphones, paired with the integrated headphone amplifier, provide an instant listening experience with no additional equipment required.

Cartridge Assembly Line Circa 1962

Over 55 Years of Analog Excellence

We got our start in Tokyo in 1962, designing and manufacturing high-performance phono cartridges. That half-century’s worth of analog expertise goes into every turntable we produce, ensuring you get the best listening experience from your vinyl.

Features

Experience the high-fidelity audio of vinyl
Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
Integrated headphone amplifier with front-panel 3.5 mm (1/8") headphone jack and volume control
ATH-250AV over-ear headphones with 40 mm drivers, 3.5 m (11.5') cable and 3.5 mm (1/8") stereo mini-plug
Anti-resonance, die-cast aluminum platter
Redesigned tonearm base and headshell for improved tracking and reduced resonance
Integral Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
Built-in switchable phono pre-amplifier for phono- or line-level output
Includes: ATH-250AV headphones, detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover

Specifications

Turntable
Type	Belt drive turntable, fully automatic
Motor	DC servo-controlled
Drive Method	Belt-drive
Speeds	33-1/3 RPM, 45 RPM
Turntable Platter	Aluminum
Wow and Flutter	Less than 0.25% (WTD) @ 3 kHz
Signal-to-Noise Ratio	>50 dB (DIN-B)
Output Level	Pre-amp “PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE” 150 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain	36 dB nominal, RIAA equalized
Power Supply Requirements	100 to 240 V, 50/60 Hz, 0.6 A Max.
Dimensions	359.5 mm (14.15") W x 97.5 mm (3.84") H x 373.3 mm (14.70") D
Weight	2.7 kg (5.95 lbs)
Accessories Included	Dust cover, Felt mat, Platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9')), AC adapter (approx. 1.5 m (4.9'))
Notes	Replacement Stylus: ATN3600L Headphones Type: Closed-back Dynamic Driver Diameter: 40 mm Frequency Response: 18 – 22,000 Hz Maximum Input Power: 500 mW Sensitivity: 102 dB/mW Impedance: 43 ohms Weight: 97 g (3.4 oz), without cable Cable: 3.5 m (11.5') Connector: 3.5 mm (⅛") stereo mini-plug

Downloads

AT-LP60XHP User Manual

AT-LP60XHP FCC DOC

Additional Products for use with AT-LP60X

Shop Now

ATN3600L

Replacement Stylus

Shop Now

AT6012

Record Care Kit