AT835ST

Out of Stock

AT835ST

Overview

AT835ST

The AT835ST has been updated. Click here for more information on the newest model. At 9.29" (236.0 mm) in length, the AT835ST provides broadcasters, videographers and sound recordists professional quality stereo audio in a microphone that resembles a monaural shotgun mic. That means the AT835ST is easy to use with standard camera mounts, shockmounts and windscreens. Engineered for long-distance pickup in broadcasting and film/TV production, this compact M-S stereo shotgun features internal matrixing innovations that allow for stereo audio with or without an external matrix. It also features switchable low-frequency roll-off and independent line-cardioid and figure-of-eight condenser elements.

Features

Designed for broadcasters, videographers and sound recordists
Compact, lightweight design is perfect for camera-mount use
Independent Line-cardioid and Figure-of-eight condenser elements
Switchable low-frequency roll-off
Switch selection of non-matrixed M-S mode and two internally-matrixed left/right stereo modes
Includes a 24" (0.61 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors)

Specifications

Microphones
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Line-cardioid, Figure-of-eight
Frequency Response	40-20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	Mid: -30 dB (31.6 mV) re 1V at 1 Pa; Side: -34 dB (19.9 mV) re 1V at 1 Pa; LR Stereo: -36 dB (15.8 mV) re 1V at 1 Pa
Maximum Input Sound Level	Mid: 123 dB SPL, 1 kHz at 1% T.H.D.; Side: 127 dB SPL, 1 kHz at 1% T.H.D.; LR Stereo: 126 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	Mid: 101 dB, 1 kHz at Max SPL; Side: 101 dB, 1 kHz at Max SPL; LR Stereo: 102 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	Mid: 72 dB SPL, 1 kHz at 1 Pa; Side: 68 dB SPL, 1 kHz at 1 Pa; LR Stereo: 70 dB SPL, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 4 mA typical at 48V, each channel
Switches	M-S, LR Stereo-Wide (LR-W); LR Stereo-Narrow (LR-N); Flat, roll-off
Weight	3.6 oz (103 g)
Cable	Dual 24" (0.61 m) shielded two-conductor, terminated in two XLR3M-type connectors
Dimensions	9.29" (236.0 mm) long, 0.83" (21.0 mm) diameter
Output Connector	Integral XLR5M-type
Accessories Included	AT8405a stand clamp for 5/8"-27 threaded stands; AT8134 windscreen; protective carrying case
Audio-Technica Case Style	SG2

Downloads

AT835ST Specification Sheet