ATM350

Overview

ATM350

Please see the updated ATM350a Instrument Microphone Systems. Supplied with Audio-Technica’s versatile UniMount® clip and new violin mount, the low-profile ATM350 is an exceptional cardioid condenser microphone designed to clip to brass, upright bass, reeds, piano, snare, toms, and violin. The microphone offers a crisp, clear, well-balanced response, even at high SPLs. It features an integral 80 Hz hi-pass filter on the in-line power module. Its cardioid polar pattern reduces pickup of sounds from the side and rear for effective protection against feedback.

Features

Low-profile design for minimum visibility
UniMount® clip permits accurate positioning, provides shock resistance and protects element
Unique violin mount permits unobtrusive placement of microphone between the instrument’s bridge and tailpiece
Crisp, clear, well-balanced response, even at high SPLs
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source
Interchangeable elements available for hypercardioid and omnidirectional polar patterns
Corrosion-resistant contacts from gold-plated XLRM-type connector
Rugged, all-metal design and construction for years of trouble-free use

Specifications

Microphone
Element	Fixed-charge back plate permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	40-20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	–49 dB (3.5 mV) re 1V at 1 Pa
Maximum Input Sound Level	149 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range	122 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	67 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 3.5 mA typical
Switches	Flat, roll-off
Weight (Microphone)	14.5 g (0.5 oz)
Weight (Power Module)	81.2 g (2.9 oz)
Weight	Microphone: 14.5 g (0.5 oz) Power module: 81.2 g (2.9 oz)
Cable	4.0 m (13.1') long (permanently attached to microphone), 3.2 mm (0.13") diameter, 2-conductor shielded cable with TA3F-type connector
Dimensions	Microphone: 37.8 mm (1.49") long, 12.2 mm (0.48") diameter Power module: 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
Dimensions (Power Module)	92.9 mm (3.66") long, 18.9 mm (0.74") diameter
Dimensions (Microphone)	37.8 mm (1.49") long, 12.2 mm (0.48") diameter
Output Connector (Power Module)	Integral 3-pin XLRM-type
Output Connector	Power module: Integral 3-pin XLRM-type
Accessories Included	AT8542 power module; AT8418 UniMount® microphone instrument mount; AT8468 violin mount; soft protective pouch
Audio-Technica Case Style	M36

Downloads

ATM350 Submittal Sheet

ATM350 Specification Sheet