ESW-T212

Overview

ESW-T212

Designed to complement the Engineered Sound True Diversity UHF ESW-R220 dual receiver or ESW-R210 single receiver, the ESW-T212 plug-on transmitter converts a wired handheld dynamic or battery-powered condenser microphone to wireless performance. The unit features interference-resistant UHF band operation and A-T’s sophisticated Tone Lock™ tone squelch system that opens the receiver’s audio circuits only when an Engineered Sound transmitter is detected. Other features include easily accessible frequency controls, mic level control, power switch and battery condition indicator.

Features

Converts a "wired" handheld dynamic or battery-powered condenser microphone to wireless
100 PLL-synthesized channels, switch-selectable
Interference-resistant UHF band operation
Special Tone Lock™ inaudible signal opens the receiver's audio output, assuring only intended reception
Easily accessible frequency controls, mic level control, On/Standby/Off switch and battery condition indicator
Operates on one long-lasting, readily-available 9V battery
Combines excellent performance, robust construction and convenient operation
Engineered Sound wireless transmitters and receivers are offered separately, rather than in pre-set combinations, to permit choosing exactly the right components for your particular application: ESW-R210 UHF Synthesized True Diversity Receiver ESW-R220 UHF Synthesized True Diversity Dual Receiver ESW-T211 UHF Synthesized UniPak® Body-pack Transmitter ESW-T214 UHF Synthesized Handheld Microphone/Transmitter

Specifications

Overall System
Operating Frequencies	UHF band, 728.125 MHz to 740.500 MHz
Modulation Mode	FM
Normal Deviation	±5 kHz
Frequency Response	100 Hz to 15 kHz
Frequency Stability	±0.005%, Phase Lock Loop frequency control
Tone Squelch Frequency	32.768 kHz
Operating Range	300' typical
Operating Temperature Range	41° F (5° C) to 113° F (45° C)
Number Of Channels	100 total

Receiver
Operating Temperature Range	41° F (5° C) to 113° F (45° C)

Downloads

ESW-T212 Manual