System 10 Camera-Mount
Portable Camera-Mount Digital Wireless Systems

System 10 Camera-Mount

System 10 Camera-Mount
  • Overview
  • Gallery
  • Features
  • Specifications

Overview

System 10 Camera-Mount

With its compact and portable design, the System 10 Camera-Mount high-fidelity digital wireless system is ideally positioned to capture media on the go. Perfect for video production, electronic news gathering (ENG) and every mobile application in between, the receiver features multiple mounting options to accommodate a variety of cameras and recording devices.
System 10 Camera-Mount

Features

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance
  • Operates in the 2.4 GHz range – completely free from TV interference
  • Ultra compact receiver size with multiple mounting options
  • Selectable balanced and unbalanced output jacks with level control for use with most cameras and recording devices
  • Internal rechargeable 12-hr battery
  • Separate headphone port and volume control for local audio monitoring
  • Multi-pairing function to link a single receiver with up to eight body-pack or handheld transmitters
  • Three levels of diversity assurance: frequency, time & space
  • Automatic frequency selection for seamless, interference-free operation
  • Extremely easy operation with instantaneous channel selection, sync and setup

Specifications

Overall System
Operating Frequencies 2.4 GHz ISM band (2400 to 2483.5 MHz)
Frequency Response 20 Hz to 20 kHz Depending on microphone type
Operating Range 30 m (100') radius, 60 m (200') diameter typical
Open range environment with no interfering signals
Total Harmonic Distortion <0.05% typical
Operating Temperature Range 0° C to +40° C (32° F to 104° F)
Battery performance may be reduced at very low temperatures
Audio Sampling 24 bits / 48 kHz
Handheld Transmitter
RF Power Output 10 mW
Spurious Emissions Following federal and national regulations
Battery Type Two 1.5V AA not included
Battery Life >7 hours (alkaline) Depending on battery type and use pattern
Dimensions 254.8 mm (10.03") long, 50.0 mm (1.97") diameter
Net Weight 280 grams (9.9 oz) without batteries
Accessories Included AT8456a Quiet-Flexâ„¢ stand clamp
Body Pack
RF Power Output 10 mW
Battery Life >7 hours (alkaline) Depending on battery type and use pattern
Battery Type Two 1.5V AA not included
Dimensions 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D
Input Connections Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V
Net Weight 100 grams (3.5 oz) without batteries
Spurious Emissions Following federal and national regulations
Receiver
Receiving System Diversity (frequency/time/space)
Maximum Output Level 3.5 mm (1/8"), TRS balanced: +6 dBV Dual mono, unbalanced: 0 dBV
Power Supply 100-240V AC (50/60 Hz) to 5V DC 0.5A switched mode external USB-type external power supply
Operating Temperature Range 40° F (4° C) to 110° F (43° C)
Dimensions 56.0 mm (2.20") W x 91.4 mm (3.60") H x 27.8 mm (1.09") D
Weight 105 grams (3.7 oz)
Accessories Included Two antennas; camera shoe mount; AC adapter (USB-type); USB cable; 3.5 mm (1/8") stereo cable
Battery Current/Life 12 hours Depending on environmental conditions Battery Charging Time: 4 hours 30 minutes Depending on environmental conditions Charging Temperature Range: 5° C to +35° C (41° F to 95° F)
Battery Type Internal Battery: 3.7V rechargeable Li-ion battery
Battery Rating: 5.5 Wh
1,460 mAh

Downloads

System 10 Camera-Mount Manual