AT-LP3
Fully Automatic Belt-Drive Stereo Turntable

AT-LP3

Product Options:

Out of Stock
AT-LP3
  • Overview
  • Gallery
  • Features
  • Specifications

Overview

AT-LP3

The AT-LP3 fully automatic belt-drive turntable lets you take your analog listening experience to the next level with advanced features not typically found on automatic turntables. The balanced straight tone arm comes with a 1/2" mount universal headshell and AT91R Dual Moving Magnet phono cartridge, giving you excellent high-fidelity performance, plus the option to use other moving magnet or moving coil cartridges of your choosing.
AT-LP3

Features

  • Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
  • Balanced straight tone arm with hydraulically damped lift control and rest
  • Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
  • Switchable pre-amp modes for moving magnet and moving coil cartridges
  • ½" mount universal headshell with AT91R Dual Moving Magnet phono cartridge and long-life diamond stylus
  • Anti-resonance, die-cast aluminum platter with 4 mm thick rubber mat
  • Damped base construction for reduced low-frequency feedback coloration
  • Includes 45 RPM adapter and removable hinged dust cover
  • Available in black (AT-LP3BK) and white (AT-LP3WH)

Specifications

Turntable
Type Belt-drive turntable, fully automatic
Motor DC servo-controlled
Speeds 33-1/3 RPM, 45 RPM
Turntable Platter Die-cast aluminum
Wow and Flutter Less than 0.25% (WTD) @ 3 kHz (JIS)
Signal-to-Noise Ratio >50 dB (DIN-B)
Output Level Pre-amp “PHONO”: 1.5-3.6 mV nominal at 1 kHz, 5 cm/sec Pre-amp “LINE” 129-313 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 36 dB nominal, RIAA equalized
Power Supply Requirements 120V AC, 60 Hz
Dimensions 434.0 mm (17.1") W x 128.0 mm (5.0") H x 350.0 mm (13.8") D
Weight 5.2 kg (11.5 lbs.)
Accessories Included AT91R Dual Moving Magnet stereo cartridge with replaceable stylus; 1/2" mount universal headshell; power cord; 45 RPM adapter; removable hinged dust cover; 4 mm rubber mat
Notes Replacement Stylus: ATN91R

Downloads

AT-LP3 Manual