AT-XP3/H
Dual Moving Magnet Stereo DJ Cartridge with Headshell

AT-XP3/H

AT-XP3/H
  • Overview
  • Gallery
  • Features
  • Specifications
  • Reviews

Overview

AT-XP3/H

Dual Moving Magnet Stereo DJ Cartridge with Headshell
AT-XP3/H

Features

AT-XP3/H

Audiophile DJ cartridge mounted on AT-HS6BK Headshell

The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.

  • Audiophile DJ cartridge AT-XP3 pre-mounted on the AT-HS6BK Headshell
  • VM dual magnet construction
  • Durable robust design for high-quality specialist DJ playback
  • Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
  • Compatible with the replacement styli ATN-XP5 and ATN-XP7 for an upgrade
  • Configuration as single cartridge (AT-XP3), Replacement Stylus (ATN-XP3) and as headshell bundle together with the headshell AT-HS6BK available (AT-XP3/H).

AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges

  • The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
  • VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
  • Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
  • The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
  • The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.

ATN-XP7

ATN-XP5

ATN-XP3

Conical Bonded Stylus

The benefit of conical styli, even if the cartridge is "lean

Specifications

Cartridge & Stylus
Frequency Response 20 to 18,000 Hz
Channel Separation 20 dB (1 kHz)
Vertical Tracking Angle 20 degrees
Vertical Tracking Force 2.0 to 4.0 g (standard 3g)
Stylus Construction Bonded Round Shank
Recommended Load Impedance 47,000 Ω
Coil Impedance 6,700 ohms (1 kHz)
Coil Inductance 550 mH (1 kHz)
Output Voltage 5.5 mV (at 1 kHz, 5 cm/sec)
Output Channel Balance 2.0 dB (1 kHz)
Stylus Shape Conical
Cantilever Carbon reinforced ABS
Static Compliance 20 x 10 – 6 cm / dyne
Dynamic Compliance 6.0 x 10 – 6 cm / dyne (100 Hz)
Mounting Half-inch
Cartridge Weight 15.6g
Dimensions 21.2 × 21.4 × 62.4 ( H x W x D mm)
Model AT-XP3/H
Recommended Load Capacitance 100-200 pF
Replacement Stylus ATN-XP3
Stylus Size 0.6 mil

Reviews