AT-VM95ML/H
VM95 series Microlinear stereo cartridge on AT-HS6 Headshell

AT-VM95ML/H

AT-VM95ML/H
  • Overview
  • Gallery
  • Features
  • Specifications
  • Reviews

Overview

AT-VM95ML/H

VM95 series Microlinear stereo cartridge on AT-HS6 Headshell
AT-VM95ML/H

Features

AT-VM95C/H

VM95 series Microlinear stereo cartridge on AT-HS6 Headshell

  • AT-VM95ML mounted on AT-HS6BK headshell
  • The total set weight is 15.5g
  • Assembled and tested in the Audio-Technica Factory in Fukui-Japan

VM95 Series - Styli compatibility

Every cartridge diamond stylus becomes worn after a period of play.

Around 500 hours for a conical stylus, 300 hours for an Elliptical stylus, 1000 hours for a Microlinear stylus, and 800 hours for a Shibata stylus.

Our VM95 Series dual moving magnet cartridges can be used almost forever by replacing the interchangeable stylus. It is no longer necessary to purchase a complete cartridge when your diamond is worn out, you can simply buy the matching replacement stylus, but also enjoy the experience of upgrading your cartridge with a different stylus.

The six models of VM95 Series cartridges all use the same electromagnetic engine-body, therefore each of the six replacement styli are perfectly compatible.

AT-VMN95C

AT-VMN95E

AT-VMN95EN

AT-VMN95ML

AT-VMN95SH

AT-VMN95SP

Microlinear Stylus

Microlinear profile diamond stylus offers high frequency response with less wear and distortion than elliptical or conventional linear contact styli.

Preassembled With AT-HS6BK Headshell

The AT-VM95C cartridge is fitted onto the 9g aluminium die cast body headshell

Specifications

Cartridge & Stylus
Frequency Response 20 - 25,000 Hz
Channel Separation 23 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8 to 2.2g (2.0g standard)
Stylus Construction Nude Square Shank
Recommended Load Impedance 47,000 Ω
Coil Impedance 3.3 kΩ (1 kHz)
DC Resistance 485 Ω
Coil Inductance 550 mH (1 kHz)
Output Voltage 3.5 mV (@ 1 kHz, 5 cm/sec)
Output Channel Balance 1.5 dB (1 kHz)
Stylus Shape Microlinear
Cantilever Aluminium Pipe
Static Compliance 20 x 10 – 6 cm / dyne
Dynamic Compliance 10 x 10 – 6 cm / dyne (100 Hz)
Mounting 1/2” centres
Dimensions 21.2 × 21.4 × 62.4 ( H x W x D mm)
Model AT-VM95ML/H
Recommended Load Capacitance 100-200 pF
Replacement Stylus AT-VMN95ML
Stylus Size 2.2 x 0.12 mil
Type VM Stereo Dual Magnet
Weight 15.5 g
Wire Used for Coil T.P. Copper

Reviews