ES945/LED
Omnidirectional Condenser Boundary Microphone with LED

ES945/LED

Product Options:

ES945/LED
  • Overview
  • Gallery
  • Features
  • Specifications

Overview

ES945/LED Omnidirectional Condenser Boundary Microphone with LED

Omnidirectional Condenser Boundary Microphone with LED

Features

Control at your fingertips

With its low-profile design that mounts unobtrusively in tabletops for minimum visibility, the ES945/LED omnidirectional condenser boundary microphone provides clear, highly intelligible audio that is perfect for sound reinforcement, professional recording and teleconferencing, television and other demanding sound pickup applications.

Protected by a rugged all-metal case with a two-layer steel mesh grille, the microphone’s omnidirectional polar pattern affords a 360° pickup angle, while its UniGuard® RFI-shielding technology provides outstanding rejection of radio frequency interference (RFI). Users can easily toggle between mute and live audio thanks to the microphone’s capacitive-type touch-sensitive switch. An integral Red/Green LED ring indicates the mute status, staying green when the microphone is live and turning red when it is muted.

Additionally, the ES945/LED is equipped with a self-contained power module with an XLRM-type output connector, eliminating the need for an external power module.

  • Mounts unobtrusively in tabletops, ceilings or walls
  • Low-profile element Provides uniform omnidirectional polar pattern with 360° acceptance angle
  • RFI-shielding technology UniGuard® offers outstanding rejection of radio frequency interference (RFI)
  • Self-contained electronics with XLRM termination eliminate the need for external power module
  • Requires phantom power supply of 11V to 52V
  • Rugged all-metal case with a two-layer steel mesh grille
  • Capacitive touch-sensitive deviation allows users to switch easily mute / un-mute the microphone
  • Integral LED ring indicates mute status-green when mic is live, when muted red
  • A pair of isolators provide mechanical dampening of surface-mounting vibration

PURIFIED DESIGN
With a diameter of 38mm, the ES945/LED is extremely discreet and fits perfectly into a table, ceiling or wall.

GREEN/RED LED status light
The ES945/LED is equipped with a 360° LED light ring that visually indicatess the status of the integrated microphone (on / off). It works through the microphone's phantom power, without requiring an additional external power supply.

INDEPENDENT POWER MODULE

The ES945/LED is equipped with an autonomous power supply module with an XLRM-type output connector, eliminating the need for an external power module.

LED STATUS LIGHT

The integrated circular LED light indicates the microphone's status; it stays green when the microphone is on and red when it is off.</p>

TOUCH SWITCH

The touch switch located next to the capsule of the ES945/LED enables users to easily switch the microphone on or off.

uniguard technology

The UniGuard® shielding technology fitted to all microphones in the Engineered Sound series offers outstanding rejection of radio frequency interference (RFI).

Specifications

Microphones
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Omnidirectional
Frequency Response 40-19,000 Hz
Open Circuit Sensitivity -40 dB (10 mV) re 1V at 1 Pa
Maximum Input Sound Level 142 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 113 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 5.7 mA typical
Switches Touch-sensitive control: on/mute
Weight 65 g (2.3 oz)
Dimensions 84.8 mm (3.33") long,
38.0 mm (1.49") diameter
48.0 mm (1.89") maximum width
Output Connector Integral 3-pin XLRM-type
Accessories Included One pair isolators

Downloads

Declaration of Conformity
ES945/LED Frequency Response
ES945/LED Polar Pattern
ES945/LED Datasheet