PRO42
Miniature Unidirectional Condenser Boundary Microphone

PRO42

PRO42
  • Overview
  • Gallery
  • Features
  • Specifications

Overview

PRO42 Miniature Unidirectional Condenser Boundary Microphone

Miniature Unidirectional Condenser Boundary Microphone

Features

The PRO42's low-profile design assures inconspicuous appearance for surface-mount use in boardroom, school, government, house of worship and other installed applications. Designed for sound reinforcement, broadcasting and recording applications, the PRO42 brings crisp, intelligible audio reproduction to the podium, stage, conference table and beyond. With a wide-range condenser element and low-mass diaphragm for superior performance, the microphone is equipped with self-contained electronics, eliminating the need for external power modules.

  • Very low-profile design for minimum visibility
  • Wide-range condenser element with low-mass diaphragm for superior performance
  • Uniform polar pattern for maximum rejection of unwanted sounds
  • Rugged design and construction
  • 25' (7.6 m) cable permanently attached between microphone and XLRM-type connector

Specifications

Microphones
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Half-cardioid (cardioid in hemisphere above mounting surface)
Frequency Response 70-14,000 Hz
Open Circuit Sensitivity -38 dB (12.5 mV) re 1V at 1 Pa
Maximum Input Sound Level 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 105 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements 9-52V DC, 2 mA typical
Weight 1.2 oz (35 g)
Cable 25' (7.6 m) long, permanently attached
Dimensions 1.44" (36.6 mm) maximum width, 2.14" (54.3 mm) maximum length, 0.61" (15.5 mm) height
Output Connector 3-pin XLRM-type on cable

Downloads

PRO42 Dimensions
PRO42 Quick Start Guide
PRO42 Declaration of Conformity
PRO42 Frequency Response
PRO42 Polar Pattern
PRO42 Submittal Sheet
PRO42 Specification Sheet