System 20 PRO

Explore

System 20 PRO

Features

  • Digital 24-bit/48 kHz wireless operation for ultimate sound quality and dependable performance

  • Plug-and-play operation in the 2.4 GHz range – completely free from TV interference

  • User can switch between Standard mode (10 channels) and HD mode (20 channels) to minimise latency or maximise channel count, respectively

  • Receiver units can be docked in the chassis or mounted remotely (up to 328 feet away) via Ethernet cable for added versatility

  • Up to five chassis can be linked and used simultaneously

  • Each receiver channel can be paired with up to four transmitters, allowing users to instantly switch between different transmitter configurations

  • Chassis’ System ID Display shows RF signal level, system ID, transmitter battery level, and system link status

  • Each half-rack receiver chassis comes with a short and a long rack ear, and two long ears can be combined as a joining plate to secure two chassis in a full rack space

  • Compatible with Audio-Technica’s Wireless Manager software for centralised management of system settings and operations

  • Auto-lock function prevents unintended operations like turning off the power or displaying the channel select screen

  • AES128 encryption for security

  • Compatible with Syslog protocol

  • Ability to configure, monitor, and save device settings as projects in Wireless Manager

  • Transmitters and receivers include OLED screens for optimal readout of key settings and alerts

  • Water- and sweat-resistant cW-style connector on body-pack transmitter provides secure connection to lavalier mics, headworn mics, and cables with cW-style locking 4-pin connector

  • Charging terminals on body-pack and handheld transmitters work with ATW-CHG3/ATW-CHG3a and ATW-CHG3N/ATW-CHG3Na charging docks to recharge NiMH batteries

  • Supports mixed output for situations with limited input channels

Specifications

Overall System
Operating Frequencies 2,402~2,480MHz
Dynamic Range 120dB (A-weighted), typical
Total Harmonic Distortion < 0.05%, typical
Maximum Simultaneous Use (recommended) Standard: 10 channels
HD mode: 20 channels
It depends on the region and environment.
System Frequency Response 20 to 20,000Hz
Varies depending on the microphone to be installed.
Delay Standard: 2.8ms
HD mode: 6.7ms
Audio Sampling Rate Standard: 24bit/48kHz
HD mode: 24bit/48kHz
Encryption Method AES128
Receiver & Transmitter Specifications

ATW-R1440

ATW-RC14

Receiver unit external connection port  RJ45
NETWORK Port                                                RJ45: RJ45: RJ45 Fast Ethernet
LINK IN/OUT port RJ12
Output Level LINE max: +22dBu (+20dBV)
LINE Unity: -20dBu (-22dBV)
MIC max: -12dBu (-10dBV)
MIC Unity: -50dBu (-52dBV)
Power Consumption 3.7W
Power Supply DC12V 0.5A (AC adapter)
Operating temperature 0ºC to +40ºC
Dimensions 209.8mm x 165.6mm x 42.5mm (W x D x H)
Weight 740g
Included Accessory Blade tip for AC adapter and AC adapter, Rack mount adapter (short), rack mount adapter (long), Fixing screws x 5, connecting cable (30cm), rubber feet x 4

 

ATW-RU14

Modulation mode GFSK
RF output                                         10mW EIRP
RF sensitivity -90dBm, typical
Whip antenna 1/2 Dipole Antenna, Diversity
External connection port RJ45
Power Supply DC12V (RC14)
Operating Temperature 0ºC to +40ºC
Dimensions 86.0mm x 70.2mm x 18.7mm (W x D x H)
Weight  77g
Included Accessory Unit holder, holder cover, wood screws x 2, antenna x 4

 

ATW-T1401 BODY-PACK TRANSMITTER

Modulation mode GFSK
RF Output 10mW EIRP
RF sensitivity  -90dBm, typical
Whip antenna True diversity
Input Connection

Four pin locking connector
Pin 1: GND
Pin 2: INST INPUT
Pin 3: MIC INPUT
Pin 4: DC BIAS +10V

Battery DC3V (2 AA batteries)
Battery Life

AA alkaline batteries: Approx. 15 hours
AA NiMH batteries: Approx. 14 hours and 30 minutes
AA lithium batteries: Approx. 29 hours
This varies depending on usage conditions.

Operating Temperature 5ºC to +40ºC
Dimensions 63.7mm x 22.7mm x 107.4mm (W x D x H)
Weight 80g (without batteries)

 

ATW-T1402 HANDHELD TRANSMITTER

Modulation Mode GFSK
RF output 10mW EIRP
RF sensitivity -90dBm, typical
Whip antenna  True diversity
Microphone type  Dynamic type
Microphone Directional Characteristics  Hypercardioid
Battery DC3V (2 AA batteries)
Battery Life AA alkaline batteries: Approx. 18 hours
AA NiMH batteries: Approx. 16 hours and 30 minutes
AA lithium batteries: Approx. 35 hours
This varies depending on usage conditions.
Operating Temperature 5ºC to +40ºC
Dimensions 265.0mm long x 53.7mm diameter
Weight 300g
Included Accessory Microphone holder AT8456a, Conversion screw adapter (3/8" - 5/8")

 

ATW-T1406 BOUNDARY MICROPHONE TRANSMITTER

Modulation Mode GFSK
RF output  10mW EIRP
RF sensitivity  -90dBm, typical
Whip antenna  True diversity
Maximum input sound pressure level  139dB SPL
Microphone type  Capacitor type
Microphone Directional Characteristics Cardioid
Built-in battery 3.7V lithium-ion battery (5.5Wh, 1460mAh)
Battery Life Approx. 12 hours
This varies depending on usage conditions.
Charging Time Approx. 3 hours and 10 minutes
This varies depending on usage conditions.
USB Charging port USB Type-C (USB 2.0)
Operating Temperature 5ºC to +40ºC
Dimensions 90.5mm x 129.4mm x 31.9mm (W x D x H)
Weight (with battery) 510g (including battery)
Included accessory USB power adapter, blade tip for USB power adapter, USB cable (1.5 m)

 

ATW-T1407 DESK STAND TRANSMITTER

Modulation mode GFSK
RF output 10mW EIRP
RF sensitivity -90dBm, typical
Whip antenna  True diversity
Microphone Gooseneck microphone support
Phantom power supply DC24V
Built-in battery 3.7V lithium-ion battery (5.5Wh, 1460mAh)
Battery life

When using gooseneck microphone without LED: Approx. 12 hours
When using gooseneck microphone with LED: Approx. 8 hours
This varies depending on usage conditions.

Charging time Approx. 3 hours and 10 minutes
This varies depending on usage conditions.
USB Charging port USB Type-C (USB 2.0)
Operating temperature 5ºC to +40ºC
Dimensions 90.5mm x 129.4mm x 47.6mm (W x D x H)
Weight (with battery) 490g (including battery)
Included accessory USB power adapter, blade tip for USB power adapter, USB cable (1.5 m)

 

Software & Firmware

Visit our downloads page for the most up-to-date software and firmware.

If you require assistance identifying the correct software/firmware or need help with installation then please contact us.