As a turntable with Bluetooth® technology, the AT-LP60XBT provides the convenience of sending the audio wirelessly to your Bluetooth speaker or headphones so you don’t have to deal with wires and cables. However, it is not uncommon for Bluetooth devices across the market to experience minor hiccups in their processing and connectivity. If you come across an issue with your new AT-LP60XBT not pairing to any devices, or if the turntable has stopped pairing with your devices, you can perform a reset procedure to help the Bluetooth technology function correctly. Below, you will find instructions on how to reset the Bluetooth processing in the AT-LP60XBT turntable.

• Press and hold down the Bluetooth button on the turntable for about 8-10 seconds. You will see the indicator light flash red and blue rapidly back and forth, but keep holding down the button until you see the light blink red slowly twice, and then go back to flashing red and blue.

• Once the light goes back to flashing red and blue you may let go of the button. Wait for the flashing light to time out and go back to solid red.

• Once the light is solid red the reset has been completed. Press and hold down the button again to put the turntable into pairing mode (flashing red/blue) and put your Bluetooth receiving device (speaker or headphones) back into pairing mode.

If your turntable is still having trouble pairing with your devices, then there may be another device (such as a smartphone, tablet, other speakers, or even a wifi router) causing wireless interference within your environment.If you have any further issues during the setup or have any follow-up questions, we invite you to contact us so that we can offer you further advice.