Fully Automatic Wireless Belt-Drive Turntable
AT-LP70XBT
From
£219.00
From
AT-LP70XBT
Overview
AT-LP70XBT
The AT-LP70XBT Automatic Wireless Turntable is the perfect beginner turntable for those beginning their audiophile journey. Combining the experience of warm, analog audio with the convenience of Bluetooth® technology, you can listen to your vinyl over Bluetooth-enabled speakers, headphones, or other devices, including those that support the high-quality Qualcomm® aptX™ Adaptive audio codec. This user-friendly turntable plays both 33-1/3 and 45 RPM records and, in addition to its Bluetooth wireless technology, has a built-in switchable phono preamp that allows the turntable to connect to a home stereo, powered speakers, or another component, with or without a dedicated phono input.
Refine Your Sound
The turntable’s unique AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus (see list below on page), making it easy not only to replace the stylus when needed but also upgrade to a higher-quality stylus to enjoy more refined sound.
+7
AT-LP70XBT Introduction
AT-LP70XBT Setup
Fully Automatic Wireless Belt-Drive Turntable
Step by step setup instructions
AT-VMN95C
VM95 series Conical replacement stylus
£18.99
AT-VMN95E
VM95 series Elliptical replacement stylus
£29.99
AT-VMN95EN
VM95 series Elliptical Nude replacement stylus
£99.99
AT-VMN95ML
VM95 series Microlinear replacement stylus
£134.99
AT-VMN95SH
VM95 series Shibata replacement stylus
£159.99
AT-SP3X
Powered Bookshelf Speakers
£169.00
Features
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- High-fidelity audio with Bluetooth wireless technology
- Connects wirelessly to speakers and other devices equipped with Bluetooth wireless technology or to wired audio systems and powered speakers via included dual RCA output cable
- Compatible with the high-quality Qualcomm® aptX™ Adaptive audio codec
- A fixed-body AT-VM95C Integral Dual Moving Magnet™ phono cartridge is compatible with any VM95 Series replacement stylus, offering a wide choice of options for every budget and application
- Stylish three-piece chassis construction dampens resonance for improved sound quality*
- J-shaped tonearm is engineered to minimize tracking errors
- Tonearm lock reduces risk of stylus damage
- Built-in switchable phono/line pre-amplifier
- Anti-resonance, die-cast aluminium platter with felt mat
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
- Includes detachable RCA output cable (dual RCA male to dual RCA male with ground), 45 RPM adapter, and removable hinged dust cover
- Available in Black/Silver, Black/Bronze, and White/Silver
*Compared to AT-LP60X.
Specifications
| Turntable | |
|---|---|
| Motor | DC motor |
| Drive Method | Belt-drive |
| Speeds | 33-1/3 RPM, 45 RPM |
| Turntable Platter | Die-cast aluminium |
| Wow and Flutter | < 0.25% (WTD) |
| Signal-to-Noise Ratio | > 55 dB |
| Cartridge Type | This product is equipped with an AT-VM95C Dual Moving Magnet Stereo Cartridge. The cartridge cannot be removed. |
| Output Level | PHONO: 4.0 mV nominal at 1 kHz, 5 cm/sec LINE: 252 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain | 36 dB nominal, RIAA equalized |
| Power Consumption | 1.6 W |
| Dimensions | 400 mm (16") × 330 mm (13") × 110 mm (4.3") (W × D × H) |
| Weight | Approx. 2.9 kg (6.4 lbs) |
| Accessories Included | • Dust cover • Felt mat • Platter (with drive belt) • Dust cover hinges • 45 RPM adapter • RCA audio cable (Approx. 1.0 m (3.3')) • AC adapter (Approx. 1.5 m (4.9')) |
| AC Adapter | *Type: FJ-SW1261200500DN Rated Input Voltage: 100 to 240 V AC Rated Input Current: 0.4 A max. Rated Frequency: 50 Hz / 60 Hz Rated Output Voltage: 12 V DC Rated Secondary Current: 0.5 A Cable Length: Approx. 1.5m (4.9') |
| Effective Arm Length | 220 mm (8.7") |
| Overhang | 18 mm (0.71") |
| Tracking Error Angle | Less than 2.0° |
| Replacement Stylus | AT-VMN95C (sold separately) |
| Replacement Belt | AT-LP70X exclusive belt (sold separately) |
| Communication System | Bluetooth version 5.2 |
| Frequency Band | 2.402 GHz to 2.480 GHz |
| Maximum RF Output | 2.5 mW EIRP |
| Maximum Communication Range | Line of sight - approx. 10 m (33') |
| Modulation Method | GFSK, Pi/4DQPSK, 8DPSK |
| Compatible Bluetooth Profile | A2DP |
| Support Codec | Qualcomm® aptX™ Adaptive audio, Qualcomm® aptX™ audio, SBC |
| Notes | *The included AC adapter may differ depending on the country of sale. Check the rating label
on the AC adapter. For details, contact your local Audio-Technica dealer. For product improvement, the product is subject to modification without notice. |
Reviews
Downloads
Manuals
Product Security
We are committed to the security of our connected products so that you can continue to use your product with confidence throughout its lifetime. We also recognise the value that the research community plays in enhancing the security for our customers and welcome the opportunity for feedback from the community.
To report any vulnerabilities that may provide a potential attacker with the ability to compromise the integrity, availability or confidentiality of our Products and their associated services, please complete our vulnerabilities submission form.
When you report a vulnerability, you can expect a response within 1 working week and a status update within 1 working month.
As this product remains in production, its software and associated services will continue to be supported with security updates for at least 5 years from today's date.
Related Products
AT617a
Cartridge Stylus Cleaner
£29.99
AT6012
Record Cleaning Kit
£19.99