AT-OC9XEB
Features
- Dual moving coil design, featuring independent coils for both left and right channels, provides outstanding channel separation
- The coils are aligned in a reverse V-shaped formation, which exerts less pressure on the stylus, thereby minimizing distortion
- The cartridge body is pre-threaded, enabling it to be mounted onto the headshell or integral tonearm with just two screws – no nuts required
- Features a bonded elliptical stylus and aluminum cantilever
- A neodymium magnet and pure iron yoke provide increased magnetic energy
- Aluminum body minimizes unwanted vibration for reduced resonance and superior audio reproduction
- Pure copper by Ohno Continuous Casting process (PCOCC) is used for the coils to achieve pure signal transfer
Please Note: AT-OC9XEB’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.
Specifications
Cartridge & Stylus | |
---|---|
Frequency Response | 20-30,000 Hz |
Channel Separation | 25 dB (1 kHz) |
Vertical Tracking Angle | 20° |
Vertical Tracking Force | 1.8-2.2 g (2.0 g standard) |
Stylus Construction | Bonded round shank |
Recommended Load Impedance | Min. 100 ohms (when head amplifier is connected) |
Coil Impedance | 12 ohms (1 kHz) |
DC Resistance | 12 ohms |
Coil Inductance | 25 mH (1 kHz) |
Output Voltage | 0.32 mV (at 1 kHz, 5 cm/sec) |
Output Channel Balance | 1.5 dB (1 kHz) |
Stylus Shape | Elliptical bonded |
Cantilever | Aluminum pipe |
Static Compliance | 20 x 10-6 cm/dyne |
Dynamic Compliance | 9 x 10-6 cm/dyne (100 Hz) |
Mounting | Half-inch |
Dimensions | 17.3 mm (0.68") H × 16.8 mm (0.66") W × 25.7 mm (1.01") D |
Accessories Included | Non-magnetic screwdriver; 2 washers; cartridge installation screws (5 mm × 2, 8 mm × 2, 10 mm x 2, 12 mm x 2); plastic protector; brush |
Body Material | Aluminum |
Model | AT-OC9XEB |
Mounting Feature | Half-inch mount |
Stylus Curvature Radius | 0.3 x 0.7 mil |
Stylus Size | Bonded round shank |
Terminal Pins | Brass |
Type | Dual Moving Coil |
Weight | 7.6 g (0.3 oz) |
Wire Used for Coil | PCOCC |
Notes | Mounting Feature: Threaded body Note: moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable. |