Direct Drive Professional Stereo Turntable System


  • Overview
  • Gallery
  • Features
  • Specifications
  • Reviews



See A-T’s newest turntable, the AT-LP120-USB. This professional stereo turntable features a high-torque direct-drive motor for quick start-ups and a selectable internal stereo phono pre-amplifier that allows the turntable to plug directly to computers and other components with no dedicated turntable input. Other features include: forward and reverse play capability; cast aluminum platter with slip mat and a start/stop button with remote start/stop input; three speeds 33/45/78; selectable high-accuracy quartz-controlled pitch lock and pitch change slider control with +/-10% or +/-20% adjustment ranges; and removable hinged dust cover. A replaceable Audio-Technica ATP-2 cartridge is included.


  • Direct drive high-torque motor
  • Selectable 33/45/78 RPM speeds
  • Selectable internal stereo phono pre-amplifier
  • S-shaped tone arm assembly with: - Adjustable counterweight - Anti-skate adjustment - Tone arm height adjustment and lock - Tone arm lift with hydraulic action and lift lever - Tone arm rest with locking mechanism
  • Selectable high-accuracy quartz-controlled pitch lock
  • Selectable +/-10% or +/-20% pitch adjustment ranges
  • Stroboscopic platter speed indicator
  • Forward and reverse play
  • Cast aluminum record platter with slip mat
  • Start/stop button with remote start/stop input
  • Pop-up stylus target light
  • 45-RPM adapter with storage receptacle
  • Receptacle for extra headshell
  • Adjustable feet for leveling
  • Removable hinged dust cover
  • Includes professional cartridge ATP-2


Type 3-speed, fully manual operation
Motor DC motor
Drive Method Direct drive
Speeds 33-1/3 RPM, 45 RPM, 78 RPM
Turntable Platter Die-cast aluminum
Starting Torque >1.6 kgm-cm
Braking System Electronic brake
Wow and Flutter <0.2% WRMS (33 RPM)
Signal-to-Noise Ratio >50 dB
Output Level Pre-amp "Off": 2.5 mV nominal at 1 kHz, 5 cm/sec Pre-amp "On": 200 mV nominal at 1 kHz, 5 cm/sec
Phono Pre-Amp Gain 38 dB nominal, RIAA equalized
Power Supply Requirements 115/230V AC, 50/60 Hz
Dimensions 17.75" (450 mm) W x 13.88" (352 mm) D x 6.0" (157 mm) H
Weight 23.4 lbs. (10.6 kg)
Accessories Included Headshell/cartridge (ATP-2); AC line cord; 45 RPM adapter
Remote Start/Stop 2 conductor 1/4" connector (T/S) Normally open contact closure
Pitch Variation +/-10% or +/-20%
Notes Replacement Cartridge: ATP-2 (Bonded round shank)




AT-PL120 Manual