Streaming/Podcasting Pack

AT2035PK

Checking Availability.

We're sorry, but this item is unavailable.

Free -Day Shipping

Only Left!

Coming Soon

Overview

AT2035PK

The AT2035PK vocal microphone pack is designed for streamers, podcasters, and other content creators who need a versatile, easy-to-install, easy-to-adjust boom microphone setup. The pack includes an AT2035 cardioid condenser microphone, a pair of ATH-M20x professional monitor headphones and a studio boom arm threaded with a XLR cable.

The adjustable studio boom arm clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick. The boom is threaded internally with an XLR cable for a clean appearance and unhindered operation. Offering full 360° rotation and adjustable, spring-stabilized joints, the boom arm repositions quickly for optimal mic placement.

The rugged AT2035 side-address studio condenser microphone delivers exceptional detail and low noise. Equipped with a switchable 80 Hz high-pass filter and 10 dB pad, the AT2035 handles high sound pressure levels with ease. The mic comes with an AT8458 shock mount to attenuate any noise, shock or vibration that’s transmitted through boom. Its analog XLR output connects easily to a digital converter or mixer.

Rounding out the pack are the ATH-M20x pro headphones, part of Audio-Technica’s critically acclaimed M-Series line. With 40 mm drivers tuned for enhanced low-frequency performance and comfortable, sound-isolating earpads, the M20x headphones are perfect for long monitoring sessions.

Features

AT2035 Cardioid Condenser Microphone

Large diaphragm for smooth, natural sound and low noise
High SPL handling and wide dynamic range provide unmatched versatility
Custom shock mount provides superior isolation
Switchable 80 Hz high-pass filter and 10 dB pad
Cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of desired sound source

ATH-M20x Professional Monitor Headphones

Advanced build quality and engineering
40 mm drivers with rare earth magnets and copper-clad aluminum wire voice coils
Tuned for enhanced low-frequency performance
Circumaural design contours around the ears for excellent sound isolation in loud environments
Convenient single-side cable exit

Adjustable Studio Boom Arm

Full 360° rotation
Adjustable, spring-stabilized joints with thumbscrews for easy repositioning of the microphone
Clamps securely to desks, tables and other flat surfaces up to 55 mm (2.2") thick
Included XLR cable (XLRF to XLRM) extends 3 m (10') from the base of the boom arm
Internal cable management for clean desk appearance

Specifications

Microphones
Element	Fixed-charge back plate, permanently polarized condenser
Polar Pattern	Cardioid
Frequency Response	20-20,000 Hz
Low Frequency Roll Off	80 Hz, 12 dB/octave
Open Circuit Sensitivity	-33 dB (22.4 mV) re 1V at 1 Pa
Maximum Input Sound Level	148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Noise	12 dB SPL
Dynamic Range	136 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio	82 dB, 1 kHz at 1 Pa
Phantom Power Requirements	11-52V DC, 3.8 mA typical
Switches	Flat, roll-off; 10 dB pad (nominal)
Weight	403 g (14.2 oz)
Dimensions	170.0 mm (6.69") long, 52.0 mm (2.05") maximum body diameter
Output Connector	Integral 3-pin XLRM-type
Accessories Included	AT8458 shock mount for 5/8"-27 threaded stands; 5/8"-27 to 3/8"-16 threaded adapter; soft protective pouch
Audio-Technica Case Style	R5
Notes	ATH-M20x Headphones Specifications Type: Closed-back dynamic Driver Diameter: 40 mm Magnet: Neodymium Voice Coil: Copper-clad aluminum wire Frequency Response: 15 – 20,000 Hz Maximum Input Power: 700 mW at 1 kHz Sensitivity: 96 dB Impedance: 47 ohms Weight: 190 g (6.7 oz), without cable and connector Cable: 3.0 m (9.8'), straight, left-side exit Accessories Included: 6.3 mm (1/4") snap-on adapter

Reviews

Q&A

Warranties

TWO YEAR LIMITED END USER WARRANTY