Omnidirectional Condenser Microphone


  • Overview
  • Gallery
  • Features
  • Specifications
  • Reviews



The low-profile AT3032 omnidirectional condenser recording mic is outstanding for piano, acoustic guitar, and other acoustic instruments. Known for its flat, extended frequency response and wide dynamic range, the AT3032 handles high SPLs with ease. Its low-mass diaphragm improves transient response, increases response bandwidth and reduces handling and mechanical noise transfer. Its low self-noise (16 dB SPL) is perfectly suited for the most sophisticated recording equipment.


  • Outstanding performance and versatility
  • High max SPL and wide dynamic range
  • Omnidirectional polar pattern preserves “sound” of the recording location, delivers flat response and freedom from proximity effect
  • Low self-noise (16 dB SPL) – perfectly suited for today's most sophisticated digital recording equipment
  • Flat, extended frequency response
  • Lo-cut switch (80 Hz, 12 dB/octave) and 10 dB pad


Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Omnidirectional
Frequency Response 30-20,000 Hz
Low Frequency Roll Off 80 Hz, 12 dB/octave
Open Circuit Sensitivity -34 dB (19.9 mV) re 1V at 1 Pa
Maximum Input Sound Level 148 dB SPL, 1 kHz at 1% T.H.D.; 158 dB SPL, with 10 dB pad (nominal)
Noise 16 dB SPL
Dynamic Range 132 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 78 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 3 mA typical
Switches Flat, roll-off; 10 dB pad (nominal)
Weight 4.1 oz (116 g)
Dimensions 5.67" (144.0 mm) long, 0.83" (21.0 mm) maximum body diameter
Output Connector Integral 3-pin XLRM-type
Accessories Included AT8405a stand clamp for 5/8"-27 threaded stands; AT8159 windscreen; soft protective pouch
Audio-Technica Case Style S1




AT3032 Specification Sheet