AT33PTG/2
Dual Moving Coil Cartridge

AT33PTG/2

Checking Availability.
We're sorry, but this item is unavailable.
Free -Day Shipping
Only Left!
Coming Soon
More on the Way
Get it  if you order in   Price:
×
Get It Sooner
Get it by when you order within
Call to order!
AT33PTG/2
  • Overview
  • Gallery
  • Features
  • Specifications
  • Reviews

Overview

AT33PTG/2

The AT33PTG/II dual moving coil cartridge features a Microlinear stylus that, with its small curvature radius, delivers low-distortion, high-range performance, even when playing the inner circumference of a record. The Microlinear stylus, which has an average life span of around 1,000 hours, is mounted on a nude tapered boron cantilever with a double damper for reduced weight and better audio quality.

The cartridge’s two coils provide excellent channel separation and are affixed within a strong, lightweight mold made of hard resin to greatly reduce unwanted vibration. The cartridge uses a neodymium magnet and a permendur yoke for dramatically enhanced magnetic energy. The PCOCC (Pure Copper by Ohno Continuous Casting) coils ensure pure audio transmission.

Please Note: AT33PTG/2’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.

AT33PTG/2

Features

  • Moving coil cartridge with Microlinear stylus delivers exquisite, full-range audio reproduction

  • Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies

  • Neodymium magnet and permendur yoke dramatically enhance the magnetic energy

  • PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer

  • High-separation, wide-response dual moving coil

  • Strong, rigid housing limits unnecessary vibration

  • Precision-cast hard aluminum alloy body enhances rigidity and the signal-to-noise ratio

Please Note: AT33PTG/2’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.

Specifications

Cartridge & Stylus
Frequency Response 15-50,000 Hz
Channel Separation 30 dB (1 kHz)
Vertical Tracking Angle 23°
Vertical Tracking Force 1.8-2.2 g (2.0 g standard)
Recommended Load Impedance More than 100 ohms (when head amplifier is connected)
Coil Impedance 10 ohms (1 kHz)
DC Resistance 10 ohms
Coil Inductance 22 µH (1 kHz)
Output Voltage 0.3 mV (at 1 kHz, 5 cm/sec)
Output Channel Balance 0.5 dB (1 kHz)
Stylus Shape Microlinear
Cantilever Gold-plated nude tapered boron
Static Compliance 40 x 10-6 cm/dyne
Dynamic Compliance 10 x 10-6 cm/dyne (100 Hz)
Mounting Half-inch
Dimensions 16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D
Accessories Included Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge installation screws (13 mm × 2, 19 mm × 2); plastic protector; brush; PCOCC lead wire set
Mounting Feature Half-inch mount
Stylus Curvature Radius 2.2 x 0.12 mil
Stylus Size Nude square shank
Weight 6.9 g (0.24 oz)
Notes Note: Moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable.

Reviews

Q&A