
Discontinued
Stereo Shotgun Microphone
AT835ST
$945.00
AT835ST
Features
- Designed for broadcasters, videographers and sound recordists
- Compact, lightweight design is perfect for camera-mount use
- Independent Line-cardioid and Figure-of-eight condenser elements
- Switchable low-frequency roll-off
- Switch selection of non-matrixed M-S mode and two internally-matrixed left/right stereo modes
- Includes a 24" (0.61 m) cable (5-pin XLRF to two standard 3-pin XLRM connectors)
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Line-cardioid, Figure-of-eight |
Frequency Response | 40-20,000 Hz |
Low Frequency Roll Off | 80 Hz, 12 dB/octave |
Open Circuit Sensitivity | Mid: -30 dB (31.6 mV) re 1V at 1 Pa; Side: -34 dB (19.9 mV) re 1V at 1 Pa; LR Stereo: -36 dB (15.8 mV) re 1V at 1 Pa |
Maximum Input Sound Level | Mid: 123 dB SPL, 1 kHz at 1% T.H.D.; Side: 127 dB SPL, 1 kHz at 1% T.H.D.; LR Stereo: 126 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | Mid: 101 dB, 1 kHz at Max SPL; Side: 101 dB, 1 kHz at Max SPL; LR Stereo: 102 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | Mid: 72 dB SPL, 1 kHz at 1 Pa; Side: 68 dB SPL, 1 kHz at 1 Pa; LR Stereo: 70 dB SPL, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 4 mA typical at 48V, each channel |
Switches | M-S, LR Stereo-Wide (LR-W); LR Stereo-Narrow (LR-N); Flat, roll-off |
Weight | 3.6 oz (103 g) |
Cable | Dual 24" (0.61 m) shielded two-conductor, terminated in two XLR3M-type connectors |
Dimensions | 9.29" (236.0 mm) long, 0.83" (21.0 mm) diameter |
Output Connector | Integral XLR5M-type |
Accessories Included | AT8405a stand clamp for 5/8"-27 threaded stands; AT8134 windscreen; protective carrying case |
Audio-Technica Case Style | SG2 |
Reviews
Q&A
Downloads
AT835ST Specification Sheet