Discontinued
Stereo Boundary Microphone
AT849
$499.00
AT849
Features
- Designed primarily for surface-mount applications in broadcast, professional recording and sound reinforcement
- Closely-matched optimally-positioned elements deliver the spatial impact and realism of a live sound field
- Heavy die-cast case and rubber bottom pad minimize coupling of surface vibration to the microphone
- Switchable low-frequency roll-off
- Low-profile design for minimum visibility
- 25' (7.6 m) detachable cable (TA5F to two 3-pin XLRM-type connectors)
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | X/Y stereo |
Frequency Response | 30-20,000 Hz |
Low Frequency Roll Off | 150 Hz, 6 dB/octave |
Open Circuit Sensitivity | -40 dB (10.0 mV) re 1V at 1 Pa |
Channel Balance | <=2.5 dB |
Maximum Input Sound Level | 137 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 110 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 67 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 9-52V DC, 2 mA typical (each channel) |
Switches | Flat, roll-off |
Weight | 5.3 oz (149 g) |
Cable | 25' (7.6 m) long, shielded, vinyl-jacketed, stereo cable with 5-pin TA5F connector at microphone end, two 3-pin XLRM-type connectors at output end |
Dimensions | 3.62" (92.0 mm) maximum length, 2.87" (73.0 mm) maximum width |
Output Connector | Integral 5-pin TB5M |
Accessories Included | Soft protective pouch |
Reviews
Q&A
Downloads
AT849 Specification Sheet