Discontinued
Cardioid Condenser Clip-on Instrument Microphone
ATM35
$350.00
ATM35
Features
- Clips to brass, reeds, piano, acoustic bass, snare and toms
- Crisp, clear, well-balanced response, even at high SPLs
- Interchangeable elements available for hypercardioid and subcardioid polar patterns
- UniMount® clip permits accurate positioning while protecting element
- Operates on battery or phantom power
- Also available as: ATM35cW -- less power module; 55" (1.4 m) cable terminated with locking 4-pin connector for A-T UniPakâ„¢ wireless systems
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Cardioid |
Frequency Response | 30-20,000 Hz |
Low Frequency Roll Off | 150 Hz, 12 dB/octave |
Open Circuit Sensitivity | -45 dB (5.6 mV) re 1V at 1 Pa |
Maximum Input Sound Level | 145 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 118 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 67 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 2 mA typical |
Battery Type | 9V |
Battery Current/Life | 1 mA / 1000 hours typical |
Switches | On-flat, on-roll-off (phantom) Off, on-flat, on-roll-off (battery) |
Weight (Microphone) | 0.3 oz (8.5 g) |
Weight (Power Module) | 5.4 oz (153 g) |
Cable | 25' (7.6 m) long (permanently attached to microphone), with TA3F output connector that mates with TB3M jack on power module |
Dimensions (Power Module) | 3.78" (96.0 mm) H x 2.48" (63.0 mm) W x 0.87" (22.0 mm) D |
Dimensions (Microphone) | 1.39" (35.2 mm) long, 0.47" (12.0 mm) diameter |
Output Connector (Power Module) | Integral 3-pin XLRM-type |
Accessories Included | AT8418 UniMount® instrument mount; AT8532 power module; soft protective pouch |
Audio-Technica Case Style | M12 |