AT33PTG/2
Features
- Moving coil cartridge with Microlinear stylus delivers exquisite, full-range audio reproduction
- Advanced tapered boron cantilever and reduced coil weight improve the audio quality, particularly in the higher frequencies
- Neodymium magnet and permendur yoke dramatically enhance the magnetic energy
- PCOCC (Pure Copper by Ohno Continuous Casting) coil enables pure signal transfer
- High-separation, wide-response dual moving coil
- Strong, rigid housing limits unnecessary vibration
- Precision-cast hard aluminum alloy body enhances rigidity and the signal-to-noise ratio
Please Note: AT33PTG/2’s stylus assembly is not field-replaceable, but Audio-Technica offers a fee-based Moving Coil Exchange Program to properly service your moving coil cartridge.
Specifications
Cartridge & Stylus | |
---|---|
Frequency Response | 15-50,000 Hz |
Channel Separation | 30 dB (1 kHz) |
Vertical Tracking Angle | 23° |
Vertical Tracking Force | 1.8-2.2 g (2.0 g standard) |
Recommended Load Impedance | More than 100 ohms (when head amplifier is connected) |
Coil Impedance | 10 ohms (1 kHz) |
DC Resistance | 10 ohms |
Coil Inductance | 22 µH (1 kHz) |
Output Voltage | 0.3 mV (at 1 kHz, 5 cm/sec) |
Output Channel Balance | 0.5 dB (1 kHz) |
Stylus Shape | Microlinear |
Cantilever | Gold-plated nude tapered boron |
Static Compliance | 40 x 10-6 cm/dyne |
Dynamic Compliance | 10 x 10-6 cm/dyne (100 Hz) |
Mounting | Half-inch |
Dimensions | 16.0 mm (0.63") H × 16.6 mm (0.65") W × 26.5 mm (1.04") D |
Accessories Included | Non-magnetic screwdriver; 2 washers; 2 nuts; cartridge installation screws (13 mm × 2, 19 mm × 2); plastic protector; brush; PCOCC lead wire set |
Mounting Feature | Half-inch mount |
Stylus Curvature Radius | 2.2 x 0.12 mil |
Stylus Size | Nude square shank |
Weight | 6.9 g (0.24 oz) |
Notes | Note: Moving coil cartridges require receivers or preamps with compatible inputs; their stylus assemblies are not field-replaceable. |