Discontinued
Cardioid Condenser Rigid-Pipe Microphone
ES905/C
$410.00
ES905/C
Features
- Low-profile element provides uniform hypercardioid polar pattern with 100º acceptance angle
- Rigid-pipe design with ball-in-socket base permits flexible positioning
- Sturdy metal base mounts to table, desk or podium with included hardware
- Available interchangeable elements permit angle of acceptance from 90º to 360º
Specifications
| Microphones | |
|---|---|
| Element | Fixed-charge back plate, permanently polarized condenser |
| Polar Pattern | Cardioid |
| Frequency Response | 30-20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity | -40 dB (10.0 mV) re 1V at 1 Pa |
| Maximum Input Sound Level | 138 dB SPL, 1 kHz at 1% T.H.D. |
| Dynamic Range | 109 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
| Phantom Power Requirements | 11-52V DC, 4 mA typical |
| Switches | Flat, roll-off |
| Weight (Microphone) | 10.0 oz (284 g) |
| Weight (Power Module) | 2.0 oz (56 g) |
| Cable | 9.5' (2.9 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, low noise, shielded; free end attached to screw terminals in power module |
| Dimensions (Power Module) | 3.86" (98.0 mm) long, 0.74" (18.9 mm) diameter |
| Dimensions (Microphone) | 16.78" (426.2 mm) long, 0.33" (8.4 mm) head diameter |
| Output Connector (Power Module) | Integral 3-pin XLRM-type |
| Optional Interchangeable Elements | ESE-H Hypercardioid (100°) ESE-ML MicroLine® (90°) ESE-O Omnidirectional (360°) |
| Accessories Included | AT8536 power module; AT8109 foam windscreen; three #8 x 1" black oxide wood screws for microphone mount |
| Audio-Technica Case Style | M26 |
Reviews
Q&A
Downloads
ES905/C Specification Sheet (Discontinued Model)