Discontinued
Hypercardioid Condenser Rigid-Pipe Microphone
ES905/H
$410.00
ES905/H
Features
- Low-profile element provides uniform hypercardioid polar pattern with 100º acceptance angle
- Rigid-pipe design with ball-in-socket base permits flexible positioning
- Sturdy metal base mounts to table, desk or podium with included hardware
- Available interchangeable elements permit angle of acceptance from 90º to 360º
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Hypercardioid |
Frequency Response | 80-20,000 Hz |
Low Frequency Roll Off | 80 Hz, 12 dB/octave |
Open Circuit Sensitivity | -40 dB (10.0 mV) re 1V at 1 Pa |
Maximum Input Sound Level | 138 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 109 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 4 mA typical |
Switches | Flat, roll-off |
Weight (Microphone) | 10.0 oz (284 g) |
Weight (Power Module) | 2.0 oz (56 g) |
Cable | 9.5' (2.9 m) long (permanently attached to microphone), 0.13" (3.2 mm) diameter, low noise, shielded; free end attached to screw terminals in power module |
Dimensions (Power Module) | 3.86" (98.0 mm) long, 0.74" (18.9 mm) diameter |
Dimensions (Microphone) | 16.78" (426.2 mm) long, 0.33" (8.4 mm) head diameter |
Output Connector (Power Module) | Integral 3-pin XLRM-type |
Optional Interchangeable Elements | ESE-C cardioid (120°) ESE-ML MicroLine® (90°) ESE-O omnidirectional (360°) |
Accessories Included | AT8536 power module; AT8109 foam windscreen; three #8 x 1" black oxide wood screws for microphone mount |
Audio-Technica Case Style | M26 |
Reviews
Q&A
Downloads
ES905/H Specification Sheet (Discontinued Model)