Discontinued
Omnidirectional Condenser Boundary Microphone with Mute Switch and LED Indicator
ES945/LED
ES945/LED
Features
- Mounts unobtrusively in tabletops
- Capacitive-type touch-sensitive switch allows users to easily mute/un-mute the microphone
- Integral bicolored LED ring indicates mute status – stays green when mic is live, turns red when muted
- Low-profile element provides uniform omnidirectional polar pattern with 360° acceptance angle
- Slef-contained power module with XLRM-type output connector
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Requires 11V to 52V DC phantom power
- Rugged all-metal case with a two-layer steel mesh grille
- Isolators provide mechanical dampening of mounting surface vibration
- Available in two colors: black (ES945/LED) and silver (ES945SV/LED)
Specifications
Microphones | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Omnidirectional |
Frequency Response | 40-19,000 Hz |
Open Circuit Sensitivity | -40 dB (10 mV) re 1V at 1 Pa |
Maximum Input Sound Level | 142 dB SPL, 1 kHz at 1% T.H.D. |
Dynamic Range | 113 dB, 1 kHz at Max SPL |
Signal-to-Noise Ratio | 65 dB, 1 kHz at 1 Pa |
Phantom Power Requirements | 11-52V DC, 5.7 mA typical |
Switches | Touch-sensitive control: on/mute |
Weight | 65 g (2.3 oz) |
Dimensions | 84.8 mm (3.33") long, 38.0 mm (1.49") diameter 48.0 mm (1.89") maximum width |
Output Connector | Integral 3-pin XLRM-type |
Accessories Included | One pair isolators |
Reviews
Q&A
Downloads
ES945/LED Submittial Sheet