ES905CL
Cardioid Condenser Rigid-Pipe Microphone

ES905CL

ES905CL
  • Overview
  • Gallery
  • Features
  • Specifications

Overview

ES905CL

The new Engineered Sound®. Contractor-exclusive innovations for every acoustical challenge. And safe haven from RFI.

The ES905CL is designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications. Its rigid-pipe design with ball-in-socket base permits flexible positioning, while its durable metal base mounts to a table, desk or podium with included hardware. The attached wire mesh windscreen with internal pop protection effectively reduces noise from P-pops, wind, and ventilation air currents. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES905CL also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform cardioid polar pattern with a 120º acceptance angle. Power module included.

Features

  • Designed for high-quality sound reinforcement, professional recording and broadcasting
  • Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
  • Rigid-pipe design with ball-in-socket base permits flexible positioning
  • Sturdy metal base mounts to table, desk or podium with included hardware
  • Superior off-axis rejection for maximum gain before feedback
  • Requires 11V to 52V DC phantom power
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • RoHS compliant—free from all substances specified in the EU directive on hazardous substances

Specifications

Microphones
Element Fixed-charge back plate permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 60-20,000 Hz
Low Frequency Roll Off 80 Hz, 18 dB/octave
Open Circuit Sensitivity –38 dB (12.5 mV) re 1V at 1 Pa
Maximum Input Sound Level 138 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 111 dB, 1 kHz at Max SPL
Signal-to-Noise Ratio 67 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical
Weight (Microphone) 330 g (11.6 oz)
Weight (Power Module) 81 g (2.9 oz)
Weight Microphone: 330 g (11.6 oz)
Power Module : 81 g (2.9 oz)
Cable 2.9 m (9.5') long, (permanently attached to microphone) 3.2 mm (0.13") diameter, 2-conductor, shielded cable terminated with TA3F-type connector
Dimensions Microphone : 523.4 mm (20.61") long - 24.6 mm (0.97") head diameter
Power Module : 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
Dimensions (Power Module) 92.9 mm (3.66") long, 18.9 mm (0.74") diameter
Dimensions (Microphone) 523.4 mm (20.61") long 24.6 mm (0.97") head diameter
Output Connector (Power Module) Integral 3-pin XLRM-type
Output Connector Integral 3-pin XLRM-type (Power module)
Optional Interchangeable Elements ESE-H hypercardioid (100°); ESE-O omnidirectional (360°
Accessories Included AT8538 power module; (3) #8 x 1" black oxide wood screws for microphone mount
Audio-Technica Case Style M37

Reviews

Q&A

Downloads

ES905CL Submittal Sheet
ES905CL Specification Sheet