Omnidirectional Condenser Boundary Microphone with 5-Pin XLR Output and Remote Muting
ES945O/FM5
$279.00
ES945O/FM5
Features
- Designed for surface-mount applications such as conferencing, recording, monitoring and other demanding sound pickup applications
- Logic I/O capability permits control of remote devices from mic’s touch-sensitive capacitive-type user switch
- Highly visible two-state RGB LED ring (7 selectable colors + OFF) indicates mic status
- Low-profile element provides uniform omnidirectional polar pattern with 360° acceptance angle
- Mounts unobtrusively in tabletops and panels
- Self-contained power module with 5-pin XLR output connector
- Rugged all-metal case with a two-layer steel mesh grille
- Rubber Isolators provide mechanical dampening of mounting-surface vibration
- Requires 11V to 52V DC phantom power
- UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- RoHS compliant—free from all substances specified in the EU directive on hazardous substances
Specifications
Microphone | |
---|---|
Element | Fixed-charge back plate, permanently polarized condenser |
Polar Pattern | Omnidirectional |
Frequency Response | 60-15,000 Hz |
Open Circuit Sensitivity | -33 dB (0 dB = 1V/Pa, 1 kHz) |
Output Impedance | 60 ohms |
Maximum Input Sound Level | 130 dB SPL (1 kHz at 1% THD) |
Dynamic Range | (typical) 109 dB (1 kHz at max SPL) |
Signal-to-Noise Ratio | 73 dB (1 kHz at 1 Pa, A-weighted) |
Phantom Power Requirements | 11-52V DC, 6.8 mA |
Weight | 59 g (2.1 oz) |
Dimensions | 38.0 mm (1.50") W x 48.0 mm (1.89") D x 84.8 mm (3.34") H |
Output Connector | 5-pin XLRM-type |
Accessories Included | Rubber isolators (two types), nut |
Reviews
Q&A
Downloads
ES945O/FM5 User Manual
ES945O/FM5 Quick Start Guide
ES945O/FM5 CAD Drawing