Discontinued
VHF Wireless Systems
Pro Series 3
$179.95
Pro Series 3
Features
- Easy operation and clear sound quality
- Reliable performance and durable construction
- Available in a choice of three fixed VHF frequencies that operate outside the range of US broadcast television
- Includes rugged storage/road case designed to fit all components
- Advanced dipole antenna system for extended operating range
- Power, RF, and AF Peak indicators
- Volume control, ¼” output jack and space-saving power supply
- Rugged unidirectional dynamic element on handheld microphone/transmitter
- Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
- Professional locking connector on UniPak® body-pack transmitter
- Available in 7 system configurations
Specifications
Overall System | |
---|---|
Operating Frequencies | VHF high band, 169 MHz to 172 MHz |
Modulation Mode | FM |
Maximum Deviation | ±15 kHz |
Frequency Response | 80 Hz to 13 kHz |
Frequency Stability | ±0.005% |
Operating Range | 200' typical |
Operating Temperature Range | 40° F (4° C) to 110° F (43° C) |
Number Of Channels | Fixed channel |
Notes | CONSUMER ALERT Most users do not need a license to operate this wireless microphone system. Nevertheless, operating this microphone system without a license is subject to certain restrictions: the system may not cause harmful interference; it must operate at a low power level (not in excess of 50 milliwatts); and it has no protection from interference received from any other device. Purchasers should also be aware that the FCC is currently evaluating use of wireless microphone systems, and these rules are subject to change. For more information, call the FCC at 1-888-CALL-FCC (TTY: 1-888-TELL-FCC) or visit the FCC’s wireless microphone website at www.fcc.gov/cgb/wirelessmicrophones. |
Handheld Transmitter | |
---|---|
RF Power Output | 10 mW High position, 2 mW Low position, typical |
Spurious Emissions | Under federal regulations |
Microphone Element | Dynamic unidirectional |
Battery Type | 9V (NEDA type 1604) alkaline, not included |
Battery Life | Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) |
Current Consumption | 30 mA typical |
Dynamic Range | >=90 dB, A-weighted |
Dimensions | 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter |
Net Weight | 12.7 oz (360 g) (without battery) |
Accessories Included | AT8456a Quiet-Flex™ stand clamp |
Body Pack | |
---|---|
RF Power Output | 10 mW High position, 2 mW Low position, typical |
Battery Life | Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) |
Battery Type | 9V (NEDA type 1604) alkaline, not included |
Current Consumption | 30 mA typical |
Dimensions | 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D |
Input Connections | High impedance, low impedance, bias |
Net Weight | 2.8 oz (78 g) (without battery) |
Spurious Emissions | Under federal regulations |
Dynamic Range | >=90 dB, A-weighted |
Receiver | |
---|---|
Receiving System | Non-diversity, single-channel, dual antenna system |
Image Rejection | 50 dB minimum |
Sensitivity | 20 dBµV for 60 dB S/N (IEC-weighted) |
Power Supply | 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply |
Operating Temperature Range | 40° F (4° C) to 110° F (43° C) |
Dimensions | 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D |
Weight | 11.0 oz (311 g) |
Accessories Included | Power supply |
Total Harmonic Distortion | <=1% (10 kHz deviation at 1 kHz) |
Audio Output | 350 mV (1 kHz modulation, 10 kHz deviation, 100 k ohm load) |
Output Connector | 1/4" TS ("mono") phone jack |
Reviews
Q&A
Downloads
Pro Series 3 Manual