Discontinued
VHF Wireless Systems
Pro Series 3
179,95 US$
Pro Series 3
Características
- Easy operation and clear sound quality
- Reliable performance and durable construction
- Available in a choice of three fixed VHF frequencies that operate outside the range of US broadcast television
- Includes rugged storage/road case designed to fit all components
- Advanced dipole antenna system for extended operating range
- Power, RF, and AF Peak indicators
- Volume control, ¼” output jack and space-saving power supply
- Rugged unidirectional dynamic element on handheld microphone/transmitter
- Variable microphone trim control and easily accessible On/Standby/Off switch on transmitters
- Professional locking connector on UniPak® body-pack transmitter
- Available in 7 system configurations
Especificaciones
Overall System | |
---|---|
Frecuencias de Funcionamiento | VHF high band, 169 MHz to 172 MHz |
Modo de Modulación | FM |
Desviación Máxima | ±15 kHz |
Respuesta en Frecuencia | 80 Hz to 13 kHz |
Estabilidad de Frecuencia | ±0.005% |
Gama Operativa | 200' typical |
Gama de Temperatura Operativa | 40° F (4° C) to 110° F (43° C) |
Número de Canales | Fixed channel |
Handheld Transmitter | |
---|---|
Potencia de Salida RF | 10 mW High position, 2 mW Low position, typical |
Emisiones Espúreas | Under federal regulations |
Elemento del Micrófono | Dynamic unidirectional |
Tipo de Batería | 9V (NEDA type 1604) alkaline, not included |
Autonomía de la Batería | Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) |
Consumo de Corriente | 30 mA typical |
Dimensiones | 9.50" (241.3 mm) long, 2.10" (53.3 mm) maximum diameter |
Peso | 12.7 oz (360 g) (without battery) |
Accesorios Incluidos | AT8456a Quiet-Flex stand clamp |
Body Pack | |
---|---|
Potencia de Salida RF | 10 mW High position, 2 mW Low position, typical |
Autonomía de la Batería | Approximately 15 hours in High position; Approximately 20 hours in Low position (depending on battery type and use pattern) |
Tipo de Batería | 9V (NEDA type 1604) alkaline, not included |
Consumo de Corriente | 30 mA typical |
Dimensiones | 2.56" (65.0 mm) W x 4.33" (110.0 mm) H x 1.00" (25.4 mm) D |
Conexiones de Entrada | High impedance, low impedance, bias |
Peso Neto | 2.8 oz (78 g) (without battery) |
Emisiones Espúreas | Under federal regulations |
Receiver | |
---|---|
Sistema de Recepción | Non-diversity, single-channel, dual antenna system |
Rechazo de Imagen | 50 dB minimum |
Sensibilidad | 20 dBµV for 60 dB S/N (IEC-weighted) |
Fuente de Alimentación | 100-240V AC (50/60 Hz) to 12V DC 1A (center positive) switched mode external power supply |
Dimensiones | 7.48" (190.0 mm) W x 1.65" (42.0 mm) H x 5.12" (130.0 mm) D |
Peso | 11.0 oz (311 g) |
Accesorios Incluidos | Power supply |
Distorsión Armónica Total | <=1% (10 kHz deviation at 1 kHz) |
Descargas
Pro Series 3 Manual