System 10 Wireless Handheld Microphone System
ATW-1102
ATW-1102
Plus d'infos
| Overall System | |
|---|---|
| Bandes de Fréquences | 2.4 GHz ISM band (2400 to 2483.5 MHz) |
| Réponse en Fréquence | 20 Hz to 20 kHz Depending on microphone type |
| Portée de Fonctionnement | 30 m (100') typical Open range environment with no interfering signals |
| Distortion Harmonique Totale | <0.05% typical |
| Température de Fonctionnement | 0° C to +40° C (32° F to 104° F) Battery performance may be reduced at very low temperatures |
| Handheld Transmitter | |
|---|---|
| Puissance en Sortie | 10 mW |
| Emissions Parasites | Following federal and national regulations |
| Type de Pile | Two 1.5V AA not included |
| Durée de vie des piles | >7 hours (alkaline) Depending on battery type and use pattern |
| Dimensions | 254.8 mm (10.03") long, 50.0 mm (1.97") diameter |
| Poids | 280 grams (9.9 oz) without batteries |
| Accessoires Fournis | AT8456a Quiet-Flex™ stand clamp |
| Body Pack | |
|---|---|
| Puissance en Sortie | 10 mW |
| Durée de vie des piles | >7 hours (alkaline) Depending on battery type and use pattern |
| Type de Pile | Two 1.5V AA not included |
| Dimensions | 70.2 mm (2.76") W x 107.0 mm (4.21") H x 24.9 mm (0.98") D |
| Connecteurs en Entrée | Four-pin Locking Connector Pin 1: GND, Pin 2: INST INPUT, Pin 3: MIC INPUT, Pin 4: DC BIAS +9V |
| Poids | 100 grams (3.5 oz) without batteries |
| Emissions Parasites | Following federal and national regulations |
| Receiver | |
|---|---|
| Système Récepteur | Diversity (frequency/time/space) |
| Niveau de Sortie Maximal | XLR, balanced: 0 dBV 1/4" (6.3 mm), unbalanced: +6 dBV |
| Alimentation | 100-240V AC (50/60 Hz) to 12V DC .5A (center positive) switched mode external power supply |
| Dimensions | 190.0 mm (7.48") W x 46.2 mm (1.82") H x 128.5 mm (5.06") D |
| Poids | 290 grams (10.2 oz) |
| Accessoires Fournis | Power supply |