ATW-F620EF1
Band pass filter paar

ATW-F620EF1

ATW-F620EF1
  • Overzicht
  • Gallerij
  • Eigenschappen
  • Specifications

Overzicht

ATW-F620EF1

Band-Pass Filter Pair

These band-pass filters help eliminate out-of-band signals that can saturate the front end of wireless microphone receivers. They can also greatly improve dynamic range by reducing noise and third-party interference outside the operating range.  

Each is fitted with industry-standard BNC-type connectors, requiring no power or user configuration and allowing easy connection to wireless microphone antennas to reduce noise and improve wireless system performance. 

Note, the maximum pass-through current is 420 mATo avoid malfunction, make sure the pass-through current is less then 420 mA. 

Eigenschappen

  • Passive operation 
  • Industry-standard BNC-type connectors 
  • Pair 

Specifications

Antenna & Distribution
Frequentiebereik 470 to 530 MHz (ATW-F500DE2)
530 to 590 MHz (ATW-F560EE1)
590 to 650 MHz (ATW-F620EF1)
650 to 700 MHz (ATW-F675FG1)
Impedantie 50 ohms
High Frequency Transmission Loss 4 dB (typical)
Stroomdoorgang 420 mA
Gebruikstemperatuurbereik Allowable: -10 to +60 °C
Recommended: +15 to +35 °C
Verbindingen BNC-J x 2
Afmetingen 99.8 mm × 60 mm x 30 mm (W × D × H)
Gewicht 136 g

Downloads

Band-Pass Filter Dimensions (EN)
Band-Pass Filter Quick Start Guide (EN)