Dual Moving Magnet Stereo DJ Cartridge with Headshell
AT-XP5/H
119,00 €
AT-XP5/H
Funktionen
AT-XP5/H
Audiophile DJ cartridge mounted on AT-HS6BK Headshell
The AT-XP series cartridges provide a high quality sound for vinyl DJ’s. Offering all of the features of a DJ cartridge, but with a Hi-fi sound, the XP series are perfect for the stage and club DJ who prioritises sound quality.
- Audiophile DJ cartridge AT-XP5 pre-mounted on the AT-HS6BK Headshell
- VM dual magnet construction
- Durable robust design for high-quality specialist DJ playbackÂ
- Carbon fiber-reinforced ABS cantilever and nylon wire suspension ensure precise tracking
- Compatible with the replacement styli ATN-XP3 and ATN-XP7Â
- Configuration as single cartridge (AT-XP5), Replacement Stylus (ATN-XP5) and as headshell bundle together with the headshell AT-HS6BK available (AT-XP5/H).
AT-VM9E Series compatibility with the AT-XP Series DJ Cartridges
- The electromagnetic engine-body of XP-Series, is fully compatible with all replacement styli of VM95 Series and will deliver more output voltage than VM95 Series cartridge. So providing improved compatibility with phono inputs of Professional DJ Mixers.
- VM95 Series electromagnetic engine-body is also compatible with the three replacement styli of the DJ cartridge AT-XP Series, nevertheless, the electromagnetic engine-body of XP-Series, will deliver more output voltage than VM95 Series cartridge in order to provide better compatibility with phono inputs of Professional DJ Mixers.
- Note that typical tracking force when using XP Series styli is three grams as opposed to two grams for VM95 Series styli.
- The suspension design and compliance of XP-Series styli have been optimized for intensive DJ’ing, including possible manual cueing and back-cueing.
- The VM95 Series suspension design and compliances of VM95 Series have been designed for optimum audiophile reproduction.
ATN-XP7
ATN-XP5
ATN-XP3
Elliptical Bonded Stylus
Elliptical diamond stylus follows the groove modulation with greater precision compared to a conical stylus, offering improved frequency and phase responses whilst reducing distortion
Pre-mounted on the AT-HS6BK Headshell
The AT-XP5 cartridge is fitted onto the 9g aluminium die cast body headshell
Spezifikationen
Cartridge & Stylus | |
---|---|
Frequenzbereich | 20 - 18,000 Hz |
Kanaltrennung | 20 dB (1 kHz) |
Vertikaler Abtastwinkel | 20 degrees |
Vertical Tracking Force | 2.0 to 4.0 g (standard 3g) |
Schaftform der Nadel | Bonded Round Shank |
Empfohlene Lastimpedanz | 47,000 Ω |
Spulenimpedanz | 6,700 ohms (1 kHz) |
Spuleninduktivität | 1.0 H (1 kHz) |
Ausgangsleistung | 5.5 mV (at 1 kHz, 5 cm/sec) |
Kanalbalance am Ausgang | 2.0 dB (1 kHz) |
Nadelschliff | Elliptical |
Nadelträger | Carbon reinforced ABS |
Statische Nadelnachgiebigkeit | 20 x 10 – 6 cm / dyne |
Dynamische Nadelnachgiebigkeit | 6.0 x 10 – 6 cm / dyne (100 Hz) |
Befestigung | Half-inch |
Gewicht | 15.6g |
Abmessungen | 21.2 × 21.4 × 62.4 ( H x W x D mm) |
Model | AT-XP5/H |
Empfohlene Lastkapazität | 100-200 pF |
Ersatznadel | ATN-XP5 |
Nadelabmessungen | 0.3 x 0.7 mil |
Bewertungen
Downloads
AT-XP5/H User manual (Multi-Lang)