Digitaler SmartMixer®
ATDM-0604a
ATDM-0604a
Funktionen
- 6 Mic/Line-Eingänge und 1 unsymmetrischer Stereo-Eingang
- 2 symmetrische Ausgänge und 1 unsymmetrischer Stereo-Ausgang
- USB-Audio-Eingang/-Ausgang (1 Stereo-Eingang, 1 Stereo-Ausgang)
- Remote-LED-Steuerung für das Array-Hängemikrofon ES954 via GPO-Anschluss
- SmartMixer® mit wählbarem Gain-Sharing- und Gate-Modus
- Leistungsfähige Echounterdrückung für alle Eingangskanäle
- Störgeräuschunterdrückung für alle Ausgangskanäle
- Integrierter 4-Band-EQ plus Kompressor/De-Esser in jedem Eingangskanal
- 8 x 8-Band-Rückkopplungssperre für Mic/Line-Eingänge und beliebige Ausgangskanäle
- Integrierter parametrischer 12-Band-EQ, Kompressor und Limiter in jedem Ausgangskanal
- Audio-Technica LINK-Anschlüsse – kompatibel mit zahlreichen Produkten mit Audio-Technica LINK-Funktionalität
- Konfiguration der Audio-Ausgänge/-Eingänge über Gerätefront, auch ohne Computer
- Erweiterte Einstellungen konfigurierbar via Web-Browser oder Smart Mixer Manager-App (computergestützte Anwendungen)
- Remote-Steuerung via IP-Protokoll
Spezifikationen
Mixer | |
---|---|
Max. Gain | 64 dB |
Frequency Characteristics | 20 Hz to 20 kHz (MIC -16 dBu): +1.0 / -1.0 dB 20 Hz to 20 kHz (MIC -60 dBu): +1.0 / -2.0 dB 20 Hz to 20 kHz (LINE 24 dBu): +1.0 / -1.0 dB 20 Hz to 20 kHz (LINE -40 dBu): +1.0 / -2.0 dB |
Dynamic Range | 110 dB or higher, A-weighted/ST |
S/N Ratio | 90 dB or higher, A-weighted/ST |
Headroom | 20 dB or higher |
Input Referred Noise | -126 dBu or less, Rs = 150 ohm, DIN |
Common-Mode Rejection Ratio | 80 dB or higher, 1 kHz |
Residual Noise | -86 dBu or less, A-weighted |
Channel Separation | -80 dB or less, 1 kHz unity |
Total Harmonic Distortion | 0.03% or less, 1 kHz unity |
Analog Input | MIC 1 to 6 max.: 0 dBu MIC 1 to 6 unity: -40 dBu LINE 1 to 4 max.: +10 dBV LINE 1 to 4 unity: -10 dBV LINE 5 to 6 max.: +24 dBu LINE 5 to 6 unity: +4 dBu / 0 dBV / -10 dBV / -20 dBV ST max.: +10 dBV ST unity: -10 dBV / -20 dBV |
Analog Output | UNBAL max.: +10 dBV / -13 dBV UNBAL unity: -10 dBV / -33 dBV BAL 1/L, 2/R max.: +24 dBu / +20 dBV / +10 dBV BAL 1/L, 2/R unity: +4 dBu / 0 dBV / -10 dBV |
Netzteil | 100 to 240 V AC (50/60 Hz) |
Power Consumption | 17 W |
Betriebstemperatur | 0 to 40°C (32 to 104°F) |
Operating Humidity Range | 25 to 85% (with no condensation) |
Abmessungen | 219.3 mm (8.6") ×346.3 mm (14") ×44 mm (1.7") (W×D×H), including protrusions |
Gewicht | 1.89 kg (4.2 lbs) |
Finish | Front panel: Black with silver lines op/rear/sides: Black |
Phantom Power | +48V DC |
PAD (Attenuation Level) | -24 dB |
I/O Connector | INPUT ST: Euroblock connectors (3-pin) INPUT MIC/LINE 1 to 6: Euroblock connectors (3-pin) OUTPUT UNBAL: Euroblock connectors (3-pin) OUTPUT BAL 1/L, 2/R: Euroblock connectors (3-pin) GPO: Euroblock connectors (3-pin) |
Level Indicator | SIGNAL/PEAK: 1 point (Red/Yellow/Green) Peak indicate (red): -5 to 0 dB Peak hold time: 2 sec. |
Remote Control | IP protocol: RJ-45 × 1 pc IP address:192.168.33.102 (factory default) Communication speed: 100 Mbps |
Network | IP protocol: RJ-45 × 1 pc |
Link I/O | Audio-Technica LINK:RJ-45 × 4 pcs Communication speed: 100 Mbps |
USB Type B | Channel: Stereo input x 1 ch, stereo output x 1 ch (24-bit) Communication speed: High-speed (480 Mbps) |
A/D Converter | Resolution: 24-bit Dynamic range: 115 dB |
D/A Converter | Resolution: 24-bit Dynamic range: 115 dB |
Beiliegendes Zubehör | Euroblock connector × 11, Rack-mount (large, small), Rack-mount screw x 6, Power cable, Rubber foot x 4 |
Downloads
Quick Start Guide
User Manual
Software
Firmware
IP Control Specifications