Power Module with Dante™ Network Output


  • Übersicht
  • Galerie
  • Funktionen
  • Spezifikationen
  • Bewertungen



Power Module with Dante™ Network Output



Wall/Ceiling plate power module for the Dante™network

The ATND8734 is a Dante-enabled wall/ceiling plate power module designed for use with gooseneck and hanging microphones that have a TA3F-type connector. The power module is equipped with an RJ45 output jack that allows for easy connection to the network via CAT5e (or better) cable. Additionally, logic input screw terminals accept an external switch for connection to the Dante™ network.

  • Connects directly to network via Ethernet cable—no need for expensive audio cable or soldering
  • TB3M-type input for quick mounting of gooseneck and hanging microphone
  • Red/green LED status indicator
  • Input gain, low-cut filter and LED indicator ring are controlled remotely
  • Logic input accepts external switch for connection to the DANTE™-network

“Easy to implement, to use and to extend”

Dante™ technology has become the standard in the professional audio sector. The real plug-and-play solution, Dante™ uses standard Internet protocols to deliver digital audio and control data with very low latency. The ATND8677 exploits the benefits Dante™ to provide a high-performance audio solution, easy to implement, use and extend.

“Up to 512 bi-directional audio channels”

Ideally suited to boardrooms and meeting spaces, network microphones have a simple Ethernet connectivity, are inexpensive, and boast a remarkable sound quality. Dante™ can support up to 512 channels of bidirectional audio, the network microphones offer a solution that can easily be extended.

“Local or remote-controlled”

Powered directly by the network cable, the ATND8677 can also be used to transmit control data in a Dante™ networking device. Its programmable switch can be used to trigger the rotation / tilt the video camera, recall the lighting presets or to control anything else on the network.

Light indicator

LED green / red indicator light, 80Hz low-cut filter and attenuation pads switch.

Powered by the network

The ATND8734 power module feeds directly to the network via its PoE Ethernet port (Power Over Ethernet).

Symetrix and biamp

Also works with Symetrix and Biamp control software, compatible with the new feature Dante GPIO.


UniGuard® shielding technology against radio frequency interference (RFI).


Frequenzbereich 20-20,000 Hz
Trittschallfilter 80 Hz, 18 dB/Octave
Max. Eingangspegel -15 dBu @ +30 dB gain
-25 dBu @ +40 dB gain
-35 dBu @ +50 dB gain
Gewicht 330g
Abmessungen 148.0 mm diameter
47.0 mm depth
Steckverbindung Eingang TB3M-Type
Ausgangsanschluss RJ45
Beiliegendes Zubehör Fixing screw 4x



ATND8734 Datasheet (ENG)
ATND8734 Manual (multi language)