U851Rb
Condenser Boundary Microphone

U851Rb

Product Options:

U851Rb
  • Ãœbersicht
  • Galerie
  • Funktionen
  • Spezifikationen

Ãœbersicht

U851Rb

The phantom-powered U851Rb condenser boundary microphone offers outstanding speech intelligibility and transparent sound quality for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing, and other demanding sound pickup situations. The microphone is equipped with a PivotPoint® rotating output connector, UniSteep® filter, and UniGuard® RFI-shielding technology. It accepts interchangeable condenser elements – omnidirectional (360°), cardioid (120°), and hypercardioid (100°) – available separately. With a heavy die-cast case and silicon foam bottom pads to minimize coupling of surface vibration to the microphone, the U851Rb is equipped with self-contained electronics, eliminating the need for an external power module. Threaded inserts on the bottom of the microphone allow it to be mounted with screws for increased security. 

Available configurations: 

U851Rb: cardioid polar pattern (120° acceptance angle); 25.0' (7.6 m) cable with TA3F connector at the microphone and XLRM output connector; black finish.

U851RWb: cardioid polar pattern (120° acceptance angle); 25.0' (7.6 m) cable with TA3F connector at the microphone and XLRM output connector; white finish.

U851RbO: omnidirectional polar pattern (360° acceptance angle); 25.0' (7.6 m) cable with TA3F connector at the microphone and XLRM output connector; black finish.

Funktionen

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations

  • Superior off-axis rejection for maximum gain before feedback

  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone

  • Small-diameter UniPoint® element near boundary eliminates phase distortion and delivers clear, high-output performance

  • Available interchangeable elements permit angle of acceptance from 100° to 360°

  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)

  • Self-contained electronics eliminate need for external power module

  • Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone

  • Low-profile design with low-reflectance finish for minimum visibility

  • Threaded inserts on bottom of microphone allow it to be mounted with screws for increased security

Spezifikationen

Microphones
Mikrofonelement Fixed-charge back plate, permanently polarized condenser
Frequenzbereich 20-20,000 Hz
Trittschallfilter 80 Hz, 18 dB/octave
Empf. am offenen Schaltkreis -34 dB (19.9 mV) re 1V at 1 Pa
Max. Eingangspegel 134 dB SPL, 1 kHz at 1% T.H.D.
Dynamikumfang 108 dB, 1 kHz at Max SPL
Geräuschpegelabstand 68 dB, 1 kHz at 1 Pa, A-weighted
Phantomspeisung 11-52V DC, 4.4 mA
Schalter Flat, roll-off
Gewicht 253 g (8.9 oz)
Kabel 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM connectors
Abmessungen 0.91" (23.0 mm) H x 3.30" (83.9 mm) W x 4.25" (108.0 mm) D
Ausgangsanschluss Microphone: TB3M-type Cable: 3-pin XLRM-type
Optional Interchangeable Elements UE-C cardioid (120°), UE-H hypercardioid (100°), UE-O omnidirectional (360°)
Beiliegendes Zubehör Soft protective pouch

Downloads

User Manual
Quick Start Guide
U851Rb User Manual (de)
U851Rb Specification Sheet
U851Rb Dimensions
U851RbO User Manual (de)
U851RbO Specification Sheet
U851RbO Dimensions
U851Rb User Manual (de)
U851Rb Specification Sheet
U851RWb Dimensions