U891Rb
divider-line Condenser Boundary Microphone with Switch

U891Rb

Product Options:

carrat-down
U891Rb
    divider-line
  • Übersicht
  • Galerie
  • Funktionen
  • Spezifikationen
divider-line

Übersicht

U891Rb

Designed to deliver easy, flexible control in conference and boardroom installations, the versatile U891Rb condenser boundary microphone features a touch-sensitive capacitive-type user switch that can be set to three modes: touch on/off, touch to talk, and touch to mute. The phantom-powered microphone is equipped with a unique PivotPoint® rotating output connector and a two-state RGB LED status indicator. UniGuard® innovations offer unsurpassed immunity from radio frequency interference; additional interchangeable elements are available separately in omnidirectional (360°), cardioid (120°), and hypercardioid (100°) polar patterns; an 80 Hz low-cut UniSteep® filter reduces pickup of low-frequency ambient noise. The microphone’s heavy die-cast case and silicon foam bottom pads minimize coupling of surface vibration to the microphone, while threaded inserts on the bottom of the microphone allow it to be mounted with screws for increased security. The unit’s self-contained electronics eliminate the need for an external power module.

Available configurations:

U891Rb: cardioid polar pattern (120° acceptance angle); black finish.

U891RWb: cardioid polar pattern (120° acceptance angle); white finish.

U891RbO: omnidirectional polar pattern (360° acceptance angle); black finish.

Funktionen

  • Designed for surface-mount applications such as high-quality sound reinforcement, professional recording, television, conferencing and other demanding sound pickup situations

  • The capacitive touch switch can be set to any of three operating modes: touch on/off, touch to talk and touch to mute

  • Integral, phantom-powered, two-state RGB LED indicator displays on/off status of microphone

  • Superior off-axis rejection for maximum gain before feedback

  • PivotPoint® rotating output connector allows cable to exit from either the rear or the bottom of the microphone

  • Small-diameter UniPoint® element near boundary eliminates phase distortion and delivers clear, high-output performance

  • Available interchangeable elements permit angle of acceptance from 100° to 360°

  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)

  • Self-contained electronics eliminate need for external power module

  • Heavy die-cast case and non-slip silicone foam bottom pads minimize coupling of surface vibration to the microphone

  • Low-profile design with low-reflectance finish for minimum visibility

  • Threaded inserts on bottom of microphone allow it to be mounted with screws for increased security

Spezifikationen

Microphones
Mikrofonelement Fixed-charge back plate, permanently polarized condenser
Frequenzbereich 20-20,000 Hz
Trittschallfilter 80 Hz, 18 dB/octave
Empf. am offenen Schaltkreis -34 dB (19.9 mV) re 1V at 1 Pa
Max. Eingangspegel 130 dB SPL, 1 kHz at 1% T.H.D.
Dynamikumfang 104 dB, 1 kHz at Max SPL
Geräuschpegelabstand 68 dB, 1 kHz at 1 Pa, A-weighted
Phantomspeisung 11-52V DC, 9.3 mA
Schalter Activation: on/off Switch function: touch on/off, momentary on, momentary off LED Color: mic on, mic off Flat, roll-off
Gewicht 253 g (8.9 oz)
Kabel 25.0' (7.6 m) long, 0.13" (3.2 mm) diameter, 2-conductor, shielded cable with TA3F and XLRM connectors
Abmessungen 0.91" (23.0 mm) H x 3.30" (83.9 mm) W x 4.25" (108.0 mm) D
Ausgangsanschluss Microphone: TB3M-type Cable: 3-pin XLRM-type
Optional Interchangeable Elements UE-C Cardioid (120°); UE-H hypercardioid (100°); UE-O omnidirectional (360°)
Beiliegendes Zubehör Soft protective pouch

Downloads

U891Rb & U891RCb Quick Start Guide
U891Rb User Manual (de)
U891Rb Specification Sheet