AT-F7

The AT-F7 stereo cartridge features Audio-Technica’s dual coil design and elliptical stylus (0.2 x 0.7 mil) for class-leading sound quality and reliability. It offers outstanding clarity and transparency of tone, along with improved frequency response and precise stereo imaging. The cartridge is equipped with a 0.07 mm stainless suspension wire that serves an important role as a fulcrum point for audio signal transfer, resulting in excellent expression of the high-frequency range. It is an outstanding value, with sound comparable to more expensive models.

Cartridge & Stylus
Frequency Response	15 - 50,000Hz
Channel Separation	27dB (1kHz)
Vertical Tracking Angle	23°
Stylus Construction	Nude Square Shank
Recommended Load Impedance	Min 100Ω
Coil Impedance	12Ω (1kHz)
DC Resistance	12Ω
Coil Inductance	25µH (1kHz)
Output Voltage	0.35mV (1kHz and 5cm/sec.)
Output Channel Balance	1.5dB (1kHz)
Stylus Shape	Elliptical
Cantilever	Aluminium
Static Compliance	35×10-6cm/dyne
Dynamic Compliance	9×10-6cm/dyne (100Hz)
Mounting	1/2" Centers
Dimensions	17.3 (H) x 16.8 (W) x 25.4 (L) mm
Accessories Included	One non-magnetic screwdriver; one brush; two washers; two 5mm mounting screws; two nuts; two 9mm mounting screws; one plastic protector; one set of PCOCC Lead Wires (AT6106)
Body Material	Aluminium/Synthetic Resin
Stylus Curvature Radius	0.2 x 0.7 mil
Terminal Pins	Brass
Type	Dual Moving Coil
Weight	5g