Fully Automatic Belt-Drive Stereo Turntable with Universal Tonearm & Headshell
AT-LP3
From
€0.00
From
Out of Stock
AT-LP3
Overview
AT-LP3 Fully Automatic Belt-Drive Stereo Turntable
Fully Automatic Belt-Drive Stereo Turntable with Universal Tonearm & Headshell
A revolution in automation, the LP3 blends outstanding analogue sound with advanced features unique to a fully-automatic belt-drive turntable. Play 33⅓ & 45 RPM records with a pre-mounted AT91R Dual Moving Magnet phono cartridge whilst the tonearm’s removable universal headshell and switchable cartridge mode allows listeners to experiment with moving magnet and moving coil cartridges. Complete with a built-in phono pre-amplifier, the LP3 represents the next level for vinyl lovers.
+10
Features
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
- Balanced straight tonearm with hydraulically damped lift control and lockable rest
- Built-in switchable phono/line pre-amplifier with attached dual RCA output cable
- Switchable modes for moving magnet and moving coil cartridges
- AT91R Dual Moving Magnet™ phono cartridge and AT-HS3 universal headshell
- Anti-resonance, die-cast aluminium platter with 4.5 mm thick rubber mat
- Damped base construction for reduced low-frequency feedback colouration
Specifications
| Turntable | |
|---|---|
| Type | Fully Automatic, Belt-Drive |
| Motor | DC motor |
| Speeds | 33-1/3 RPM, 45 RPM |
| Turntable Platter | Die-cast aluminium |
| Wow and Flutter | Less than 0.2% WRMS (33 1/3 RPM) at3kHz |
| Signal-to-Noise Ratio | > 60 dB |
| Output Level | “PHONO” (MM) 3.5mV nominal at 1kHz, 5cm/sec “LINE” (MC) 220mV nominal at 1kHz, 5cm/sec |
| Phono Pre-Amp Gain | 36dB nominal, RIAA equalised 56dB nominal, RIAA equalised |
| Power Supply Requirements | 220 to 240 V / 50, 60 Hz |
| Dimensions | 435 mm ×353 mm×128 mm (W×D×H) |
| Weight | 5.2kg |
| Accessories Included | Rubber mat, Dust cover, Platter (with drive belt), Counterweight, AT-HS3 Headshell with AT91R VM stereo cartridge, 45 RPM adapter, Power cable |
Reviews
Downloads
AT-LP3_Manual_(Multi-Language)
Declaration of Conformity
Related Products
Dust Cover Rubber Pad
AT-LP5 Rubber Pad
€0.41
LP60X/LP3 Series Belt
Replacement belt for the AT-LP60 and AT-LP3 lines of turntables.
€1.88
Dust Cover Hinge
Replacement dust cover hinge
€1.88